PERANCANGAN DAN ANALISIS STRUKTUR STATIS PADA MEJA CNC PLASMA CUTTING MENGGUNAKAN SOLIDWORKS
DOI:
https://doi.org/10.5281/zenodo.7684151Keywords:
QFD-DFMA, ASTM A36, Yield stress, Solidworks, Stress analysisAbstract
This research was conducted to obtain maximum design results through the QFD (Quality Function Deployment) method as an initial reference that must be considered at the design stage. Conducted to determine consumer needs for products made. Followed by the DFMA (Design For Manufacturing and Assembly) method to get the design results that match the needs and improve the efficiency of the designs made to the time of manufacture and reduce the cost of materials that are not needed. Then at the final stage, a stress analysis simulation is carried out using Solidworks software to determine the maximum stress received due to the given load and can determine the safety of the table frame strength that will be loaded and find out the maximum load that the frame can accept. The material used in the frame is ASTM A36. From the results of this study, it was found that with a given loading of 600 N, the frame experienced a maximum stress of 161.1 Mpa and a yield stress of 257.76 Mpa was obtained and a safety factor of 1.3. So with these data the frame design that has been made is declared safe. And for the maximum load that the frame can accept is 97.88 kg.
Downloads
References
Amri, A. A. N. dan W. Sumbodo. 2018. Perancangan 3D Printer Tipe Core XY Berbasis Fused Deposition Modeling (FDM) Menggunakan Software Autodesk Inventor 2015. Jurnal DINAMIKA VOKASIONALl. 3(2): 110-115.
Chan, N., Ou, T.Z, & Hlaing, A.M.S. 2019. Design and Structural Analysis of 3 Axis CNC Milling Machine Table. International Journal of Trend in Scientific Research and Development. Volume 3 Nomor 6, 943-948
Chandra, H., Putra, D. P., & Romli. 2021."Investigasi Tegangan pada Poros Bertingkat Menggunakan Metode
Elemen Hingga Berbasis Computer Aided Engineering". Jurnal Austenit,Vol. 13 No. 1. Palembang
Cahyono, E. 2017. Rancang Bangun Meja Mesin Plasma Cutting Dengan Gerak 3 Axis x, y, z Menggunakan
Motor Stepper Berbasis Arduino. Skripsi. Tidak Diterbitkan. Teknik Mesin ITS Surabaya.
Rahman, A.Z, Prabowo, T.S, & Santika, P.M. 2019. Desain dan Manufaktur Mesin CNC Plasma 3 Sumbu PT. Bangun Mesin Sejahtera. Jurnal TEKNIK MESIN. Volume 3 Nomor 1
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
