PENERAPAN METODE DESIGN FOR MANUFACTURING PADA RANCANG BANGUN CNC MILLING 3 SUMBU

Article Sidebar

PDF (Bahasa Indonesia)
Published: Jun 17, 2023
DOI: https://doi.org/10.5281/zenodo.8049149
Keywords:
CNC Milling 3 sumbu, Design, DFM

Main Article Content

abdurrahman yahya
Mahasiswa Prodi Teknik Mesin Produksi dan Perawatan, Politeknik Negeri Sriwijaya
irawan malik
Politeknik Negeri Sriwjaya
ahmad zamheri
Politeknik Negeri Sriwjaya

Abstract

The use of 3 Axis CNC Milling machines lately is needed by many business actors in the creative industry. However, entrepreneurs sometimes face problems with the cost of CNC Milling machines which are quite expensive. This research focuses on developing the design of 3 Axis CNC Milling machines which are commonly circulating in the market, namely 3 Axis CNC Milling 2418. Researchers develop designs using the Design For Manufacturing method in order to minimize costs but still with good quality. The CAD-CAE program, Solidworks 2021, was used to design and analyze Von Misses stresses and safety factors. The results of the implementation of the DFM method resulted in a 3 Axis CNC Milling design with a minimum cost of 11.9% and a Factor of Safety value of more than 1.

Downloads

Download data is not yet available.

Article Details

How to Cite
yahya, abdurrahman, malik, irawan, & zamheri, ahmad. (2023). PENERAPAN METODE DESIGN FOR MANUFACTURING PADA RANCANG BANGUN CNC MILLING 3 SUMBU. MACHINERY: Jurnal Teknologi Terapan, 4(2), 67–75. https://doi.org/10.5281/zenodo.8049149
Issue
Vol. 4 No. 2 (2023): Machinery:04022023
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

References

Boothroyd G., dkk. “Introduction. In Product design for manufacture and assembly by Geoffrey Boothroyd, Peter Dewhurst, Winston A. Knight”. 5.th ed., pp. 1-5. 2015. M. Dekker, New York

Desphande, S. V. 2018. Design and Fabriction Of 3-Axis CNC Milling Machine. Jurnal. Engineering Research and General Science Volume 6, Issue 4, July-August, 2018. ISSN 2091-2730.

Hanggayuh, SH. Analisis Finite Element Pada Struktur Mesin Micromilling Dengan Material Aluminum, Cast Iron, Steel, Dan Stainless Steel. 2014. PhD Thesis. Universitas Gadjah Mada.

Hasibuan, dkk. 2019. Rancang Bangun Mesin CNC Milling 3 Axis Untuk Anggrave Pcb Berbasis Arduino Uno. Jurnal Rancang Bangun Mesin CNC. Politeknik Negeri Lhokseumawe. Aceh. ISSN 2581-2890.

Irawan, M., dkk. 2021. Penerapan Metode DFMA Dirancang Bangun Rangka Purwarupa Mesin Potong Plasma. Prosiding SNRTM, Volume 01 Desember 2021, pp. 1-6, e-ISSN: 2809-5588.

Most read articles by the same author(s)