PENGARUH PARAMETER PROSES RAPID PROTOTYPING DENGAN TEKNOLOGI STEREOLITHOGRAPHY TERHADAP KEKERASAN SPESIMEN UJI
Keywords:
SLA DLP 3D, Rapid Prototyping, Uji KekerasanAbstract
Tujuan utama dari penelitian ini adalah untuk mengetahui kekerasan material resin spesimen roda gigi dengan menggunakan prameter berbeda. Pada proses pengujian ini penguji menggunakan alat uji kekerasan Brinnel (HB / BHN), yang menggunakan indentor bola baja ⌀5 mm dan P(Kg) 250 Kg. Hasil dari pengujian ini didapatkan bahwa pengaruh prameter Exposure Time berpengaruh terhadap kekerasan. Teknik pengumpulan data yang dilakukan dengan cara Studi Literatur, observasi dan Konsultasi. Dalam pengolahan data penelitian ini menggunakan metode analisis Statistical Anova.Downloads
Download data is not yet available.
References
1. Anggoro, P. Wisnu, ST., MT Tony Yuniarto, ST.,M.Eng. 2017 Proses Rapid Prototyping Master Cetakan Berbahan Resin Epoxy Sebagai Nilai Tambah Dalam Industri Souvenir Logam Pewter. Teknologi Industri, Universitas Atma Jaya Yogyakarta.
2. Canfield S. 1997. Dynamics of Machinery. Tennessee Tech University, Deprtment of Mechanical Engineering.
3. Dept. of Oceanography, Texas A&M University. Resin 2010. https://id.wikipedia.org/wiki/Resin.
4. Doruk Erdem Yunus, Ran He, Wentao Shi, Orhan Kaya, Yaling Liu. 2017. Short fiber reinforced 3d printed ceramic composite with shear induced alignment.
5. Kalpakjian, Serope, Steven R. Schmid. Stereolithography. 2006. https://en.wikipedia.org/wiki/Stereolithography.
6. Namchul Do. 2017. Integration Of Design And Manufacturing Data To Support Personal Manufacturing Based On 3D Printing Services, The International Journal of Advanced Manufacturing Technology. Volume 90, Issue 9–12, pp 3761–73.
7. Rinanto, Andhy, Wahyudi Sutopo. 2017. Perkembangan Teknologi Rapid Prototyping Study Literatur. Surakarta Universitas Sebelas Maret.
8. Romli Romli. 2019. Modul Praktikum Pengujian Kekerasan. Politeknik Negri Sriwijaya.
9. Romli, Romli, Mardiana Mardiana. 2013. Pengaruh Kekerasan Dengan Busur Nyala Pada Material ST 37, ST 60 Dan Amutit, Vol 5, No 2, No-Issn 2622-7649, E-Issn 20851286.
10. Seprianto, Dicky, Romi Wilza, Iskandar. 2018. Pengembangan Desain Dan Rancang Bangun Suvenir Khas Kota Palembang Mengunakan Teknologi CAD Dan Additive Manufacturing. Palembang Politeknik Sriwijaya.
11. Shi Yaru, Cao Yan, Wang Yongming, Huang Liang. 2016. Influence of SLA Rapid Prototyping process parameters on the forming precision. Conference 2016 6th International Conference on Mechatronics, Computer and Education Informationization MCEI 2016.
12. Sudjana. 1994. Desain Dan Analisis Eksperimen. Edisi III, Tarsito, Bandung.
13. Sulaiman, Andry. 2010. Meneliti Tentang Pengembangan Perangkat Lunak Mesin Rapid Prototyping Dengan Metode FDM (Fused Depositionning Modelling). Fakultas Teknik Mesin Depok.
2. Canfield S. 1997. Dynamics of Machinery. Tennessee Tech University, Deprtment of Mechanical Engineering.
3. Dept. of Oceanography, Texas A&M University. Resin 2010. https://id.wikipedia.org/wiki/Resin.
4. Doruk Erdem Yunus, Ran He, Wentao Shi, Orhan Kaya, Yaling Liu. 2017. Short fiber reinforced 3d printed ceramic composite with shear induced alignment.
5. Kalpakjian, Serope, Steven R. Schmid. Stereolithography. 2006. https://en.wikipedia.org/wiki/Stereolithography.
6. Namchul Do. 2017. Integration Of Design And Manufacturing Data To Support Personal Manufacturing Based On 3D Printing Services, The International Journal of Advanced Manufacturing Technology. Volume 90, Issue 9–12, pp 3761–73.
7. Rinanto, Andhy, Wahyudi Sutopo. 2017. Perkembangan Teknologi Rapid Prototyping Study Literatur. Surakarta Universitas Sebelas Maret.
8. Romli Romli. 2019. Modul Praktikum Pengujian Kekerasan. Politeknik Negri Sriwijaya.
9. Romli, Romli, Mardiana Mardiana. 2013. Pengaruh Kekerasan Dengan Busur Nyala Pada Material ST 37, ST 60 Dan Amutit, Vol 5, No 2, No-Issn 2622-7649, E-Issn 20851286.
10. Seprianto, Dicky, Romi Wilza, Iskandar. 2018. Pengembangan Desain Dan Rancang Bangun Suvenir Khas Kota Palembang Mengunakan Teknologi CAD Dan Additive Manufacturing. Palembang Politeknik Sriwijaya.
11. Shi Yaru, Cao Yan, Wang Yongming, Huang Liang. 2016. Influence of SLA Rapid Prototyping process parameters on the forming precision. Conference 2016 6th International Conference on Mechatronics, Computer and Education Informationization MCEI 2016.
12. Sudjana. 1994. Desain Dan Analisis Eksperimen. Edisi III, Tarsito, Bandung.
13. Sulaiman, Andry. 2010. Meneliti Tentang Pengembangan Perangkat Lunak Mesin Rapid Prototyping Dengan Metode FDM (Fused Depositionning Modelling). Fakultas Teknik Mesin Depok.
Downloads
Published
2020-02-13
How to Cite
Novarika, W., Ginting, M., Sani, A. A., & Astra, D. (2020). PENGARUH PARAMETER PROSES RAPID PROTOTYPING DENGAN TEKNOLOGI STEREOLITHOGRAPHY TERHADAP KEKERASAN SPESIMEN UJI. AUSTENIT, 11(2), 27–32. Retrieved from https://jurnal.polsri.ac.id/index.php/austenit/article/view/1863
Issue
Section
Articles
License
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
