STUDI PENYUSUTAN PEMBUATAN GIGI PALSU DENGAN 3D PRINTING FDM PENDEKATAN METODE TAGUCHI

Main Article Content

Ahmad Zamheri
Fatahul Arifin
Angga Panjy Syahputra

Abstract

Fused Deposition Modeling (FDM) is a 3D Printing technique used to print products using filaments as material. The printed product has ideal geometric characteristics if it has meticulous size and perfect shape. The main objective of this research is to find out the shrinkage of the material is the filament human denture product using prameter is different. In the process of testing this test using the tool testers Digimatic Vernier Caliper Mitutoyo Absolute, which uses accuracy 0,02 mm. The Taguchi method are used to analyzed the data result. Manufacture process which is used Layer Height 0,15 mm, Print Speed 20 mm/s, dan Print Temperature 220 ⁰C.Keywords: FDM 3D Printing, Shrinkage, Taguchi 

Downloads

Download data is not yet available.

Article Details

How to Cite
Zamheri, A., Arifin, F., & Syahputra, A. P. (2020). STUDI PENYUSUTAN PEMBUATAN GIGI PALSU DENGAN 3D PRINTING FDM PENDEKATAN METODE TAGUCHI. AUSTENIT, 12(2), 43–47. https://doi.org/10.5281/zenodo.4547840
Section
Articles
Author Biography

Angga Panjy Syahputra, Jurusan Teknik Mesin Politeknik Negeri Sriwijaya

Teknik Mesin Bidang Manufaktur, Desain Produk, 3D Printing

References

Ginting, M., Sani A. A., AK. Wirda N., & Astra D. (2019). Pengaruh Parameter Proses Rapid Prototyping dengan Teknologi Stereolithography terhadap Kekerasan Spesimen Uji. None, Jurnal Austenit Vol. 11 No. 2.

Jenarthanan, M. P., & Jeyapaul, R. (2018). Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method. International Journal of Engineering, Science and Technology. https://doi.org/10.4314/ijest.v5i4.3

Liao, H. C. (2003). Using PCR-TOPSIS to optimise Taguchi’s multi-response problem. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-002-1485-x

Putra, K. S., Ds, S., Sari, U. R., & Ds, S. (2018). Pemanfaatan Teknologi 3D Printing Dalam Proses Desain Produk Gaya Hidup. Pemanfaatan Teknologi 3D Printing Dalam Proses Desain Produk Gaya Hidup.
Rahman, F., Saputera D. dan Adhani R. (2016). Faktor yang Mempengaruhi Permintaan Gigi Tiruan pada Lansia (Tinjauan Terhadap Biaya Perawatan, Kecemasan dan Sarana). Jurnal Kedoktera Gigi Unej, 13(1), 5–11

Rengier, F., Mehndiratta, A., Von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H. U., & Giesel, F. L. (2010). 3D printing based on imaging data: Review of medical applications. In International Journal of Computer Assisted Radiology and Surgery. https://doi.org/10.1007/s11548-010-0476-x

Satyanarayana, B., & Prakash, K. J. (2015). Component Replication Using 3D Printing Technology. Procedia Materials Science. https://doi.org/10.1016/j.mspro.2015.06.049

Sidi, P., & Wahyudi, M. (2013). Aplikasi Metoda Taguchi Untuk Mengetahui Optimasi Kebulatan Pada Proses Bubut Cnc. Rekayasa Mesin.

Yaman, U. (2018). Shrinkage compensation of holes via shrinkage of interior structure in FDM process. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-017-1018-2

Most read articles by the same author(s)

1 2 > >>