ROUGHNESS ANALYSIS OF MOLDING BASED ON ADDITIVE MANUFACTURING MATERIAL POLYLACTIC ACID

Authors

  • Muhammad Al Hafiz a:1:{s:5:"en_US";s:26:"Politeknik Negeri Sriwjaya";}
  • Ahmad Junaidi Politeknik Negeri Sriwijaya
  • Ella Sundari Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.5281/zenodo.7246701

Keywords:

3D Printing, Molding, Polylactic Acid, Roughness, ANOVA

Abstract

At this time the development of technology has moved very fast. Humans need technology to facilitate every activity, 3D Printers continue to develop and are widely used in various countries. 3D printing uses a special printing machine to produce three-dimensional shapes. Molding or molding is a production process by forming raw materials using a rigid frame or model called a mold. This research was conducted to change the function of 3D printing which is usually to print prototypes into molds. as well as knowing the level of roughness of the mold that is printed. analysis using ANOVA that has been applied, it can be concluded that layer height: low, standard, high has an effect on the roughness of the printed molding, and it can be proven in the discussion chapter with Fcount 3.150 > Ftable 2.56. with a significant 0.034 < 0.05. and the lowest roughness results are printed using a layer height: 0.16 mm/s (high quality).

Downloads

Download data is not yet available.

References

Abbas, B. 2020. “Biduk Kajang, Perahu Rakyat Sriwijayaâ€. https://kebudayaan.kemdikbud.go.id/bpnbsumbar/perahu-kajang-perahu-berbentuk-rumah/. Diunduh pada 19/06/2015.

Abby, R.S. 2021. “Mengenal 3D printingâ€. Journalism and Website Division Staff - Humas Elektro ITK

Pratiknyo B. 2012. “Penyiapan Sumber Daya di Bidang Mouldingâ€.https://ubaya.ac.id/2018/content/articles_detail/65/PENYIAPAN-SUMBER-DAYA-DI-BIDANG-MOULDING.html. Diakses pada 12/12/2012.

Winando. 2021. “Sejarah Perahu Kajang Ikon Kabupaten Ogan Kmering Ilir, Transportasi Zaman Kerajaan Sriwijayaâ€. https://Sejarah Perahu Kajang Ikon Kabupaten Ogan Komering Ilir, Transportasi Zaman Kerajaan Sriwijaya - Tribunsumsel.com. Diakses pada 09/09/2021.

Published

2022-10-25

How to Cite

Hafiz, M. A., Junaidi, A., & Sundari, E. . (2022). ROUGHNESS ANALYSIS OF MOLDING BASED ON ADDITIVE MANUFACTURING MATERIAL POLYLACTIC ACID. MACHINERY Jurnal Teknologi Terapan, 3(3), 69–76. https://doi.org/10.5281/zenodo.7246701

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

<< < 1 2 3 4 

You may also start an advanced similarity search for this article.