PENGARUH DIAMETER PIPA DAN LUBANG BAKAR PADA TUNGKU PEMBAKARAN TEMPURUNG KELAPA DENGAN METODE PIROLISIS

Article Sidebar

PDF (Bahasa Indonesia)
Published: Jul 18, 2022
DOI: https://doi.org/10.5281/zenodo.6857577
Keywords:
Coconut Shell Charcoal, Moisture Content And Ash Content, Pyrolysis, ANOVA; Factorial type 2, Furnaces

Main Article Content

Willy Alexander
DIV Teknik Mesin Produksi dan Perawatan
Dicky Seprianto
Politeknik Negeri Sriwijaya
Eka Satria Martomi
Politeknik Negeri Sriwijaya

Abstract

Coconut shell charcoal is a product obtained from imperfect combustion of coconut shells causing complex carbon compounds not to oxidize into carbon dioxide. This event is pyrolysis. This study aims to determine the influence of pipe diameter parameters and burn hole diameter on water content and ash content of coconut shell charcoal which test specimens are made using pyrolysis method combustion furnace. The test result data was analyzed using ANOVA with 2 FI full factorial design, using 2 factors and 2 responses modeled by Design-Expert (Trial) software. The results of the analysis revealed that the main factor that most influenced the moisture content and ash content of the test specimen was the pipe diameter factor. The contribution of the influence of pipe diameter on water content is 47% and the contribution of pipe diameter influence to ash content of 56%.

Downloads

Download data is not yet available.

Article Details

How to Cite
Willy Alexander, Seprianto, D., & Martomi, E. S. (2022). PENGARUH DIAMETER PIPA DAN LUBANG BAKAR PADA TUNGKU PEMBAKARAN TEMPURUNG KELAPA DENGAN METODE PIROLISIS. MACHINERY: Jurnal Teknologi Terapan, 3(2), 55–61. https://doi.org/10.5281/zenodo.6857577
Issue
Vol. 3 No. 2 (2022): Machinery:03022022
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

References

Hadi, R.2011. “Sosialisasi Teknik Pembuatan Arang Tempurung Kelapa Dengan Pembakaran Sistem Suplai Udara Terkendali”. Buletin Teknik Pertanian Vol. 16, No.2. http://203.190.37.42/publikasi/bt16211j.pdf

Hudaya, N., Hartoyo.1990. “Pembuatan Arang Rendeman Tinggi Dari Tempurung Kelapa Dengan Kiln Drum”.Jurnal Penelitian Hasil Hutan. Vol. 7, N0.4. http://ejournal.forda-mof.org/ejournal-litbang/index.php/JPHH/article/view/3462/2998

Mardijanto, M.2018. “Perancangan Berbasis Green Ergonomic : Tungku Pembuat Arang Ramah Lingkungan”. https://edoc.uii.ac.id/bitstream/handle/123456789/6344/PDF.pdf? sequence=1&isAllowed=y

Soolany, C. Fadly.2020. “Rancang Bangun Dan Uji Kinerja Tungku Drum Kiln Pada Proses Produksi Arang Kulit Durian Sebagai Alternatif Bahan Bakar”.Jurnal Ilmiah Teknik Mesin, Vol.6. http://ejournal.uika-bogor.ac.id/index.php/ame/article/view/3259/1972

Soolany, C. 2018. “Kajian Pengunaan Drum Kiln Pada Proses Produksi Arang Dari Tempurung Kelapa”. JTI - UNUGHA, Vol.1 (No.1).

Sampurno, R. D., Homzah, O. F., Suryana, D., Sani, A. A., & Alexander, W. (2021). PEMANFAATAN LIMBAH ASAP DARI BATOK KELAPA DENGAN MESIN PENYULING ASAP CAIR DI KABUPATEN BANYUASIN. AUSTENIT, 13(1), 18–22. https://doi.org/10.5281/zenodo.4741709