PENGARUH WAKTU TAHAN, TEMPERATUR, DAN QUENCHING TERHADAP PELEBURAN LIMBAH ALUMINIUM DENGAN METODE GRAVITY DIE CASTING

Article Sidebar

PDF (Bahasa Indonesia)
Published: Mar 1, 2024
DOI: https://doi.org/10.5281/zenodo.10729894
Keywords:
Aluminum Waste, Recycle, Gravity Die Casting

Main Article Content

Darma Satria
Mahasiswa Program Studi Teknik Mesin Produksi dan Perawatan, Politeknik Negeri Sriwijaya
Indra Gunawan
Jurusan Teknik Mesin, Politeknik Negeri Sriwijaya
Almadora Anwar Sani
Jurusan Teknik Mesin, Politeknik Negeri Sriwijaya

Abstract

Aluminum waste from practicum work in the CNC workshop and laboratory of Politeknik Negeri Sriwijaya is quite a lot and is wasted. This can cause pollution to the environment. Therefore, a casting process is carried out to reduce this impact, then the waste will be recycled again. Aluminum waste that has been recycled through the casting process can also become a product for reuse, especially in practical work in CNC workshops or laboratories. This casting is done using the gravity die casting method which uses a permanent mold to make it more efficient. To improve the casted product's quality, experiments are conducted. Three variables are used in this investigation, including melting temperatures of 700°C and 800°C., holding time in the mold: 10 minutes and 15 minutes, and quenching (cooling media: water and 20% brine). The methodology used in this research is Taguchi and Anova, which aims to find the influence and results of high hardness values to improve product quality. The highest hardness value result is with experimental temperature of 800℃, holding time of 10 minutes, and quenching of 20% salt water, which is 59.79 Kg/mm2.

Downloads

Download data is not yet available.

Article Details

How to Cite
Satria, D., Gunawan, I., & Sani, A. A. (2024). PENGARUH WAKTU TAHAN, TEMPERATUR, DAN QUENCHING TERHADAP PELEBURAN LIMBAH ALUMINIUM DENGAN METODE GRAVITY DIE CASTING. MACHINERY: Jurnal Teknologi Terapan, 5(1), 41–47. https://doi.org/10.5281/zenodo.10729894
Issue
Vol. 5 No. 1 (2024): Machinery: 05012024
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

References

A, A., K, K., Hasbi, M., S, S., & Yuspian. (2020). Rancang bangun dan uji coba tungku krusibel dari tabung gas bekas dengan menggunakan sumber panas gas LPG. Jurnal Teknologi Terapan, 6 (2), 118–124. https://doi.org/https://doi.org/10.31884/jtt.v6i2.258

A, L., Tiwan, & Mujiyono. (2017). Tungku krusibel dengan economizer untuk praktik pengecoran di jurusan pendidikan teknik mesin FT UNY. urnal Dinamika Vokasional Teknik Mesin, 2 (1), 21–27. https://doi.org/https://doi.org/10.21831/dinamika.v2i1.13496

A., P., Azfanizam, A. S., Ariffin, M. K. A., & Ismail, M. I. S. (2017). . Robust Product Design : A Modern View of Quality Engineering in Manufacturing Systems. International Journal of Recent Advances in Multidisciplinary Research, 4(3220–3225).

Drihandono, S., & Budiyanto, E. (2016). Pengaruh Temperatur Tuang, Temperatur Cetakan, dan Tekanan Pada Pengecoran Bertekanan (High Pressure Die Casting/HPDC) Terhadap Kekerasan dan Struktur Mikro Aluminium Paduan Silikon (Al-Si 7,79 %). Jurnal Teknik Mesin Universitas Muhammadiyah Metdro, 5(2477-250X), 30–38.

Francis, L. F. (2016). Chapter 3 - Melt Processes. Dalam L. F. Francis (Ed.), Materials Processing (hlm. 105–249). Academic Press. https://doi.org/https://doi.org/10.1016/B978-0-12-385132-1.00003-3

Jurni, M., & Siswanto, R. (2019). PENGARUH TEMPERATUR TUANG DAN JENIS MATERIAL AL RONGSOK (PISTON SEPEDA MOTOR DAN KALENG MINUMAN) TERHADAP POROSITAS, KEKERASAN, DAN STRUKTUR MIKRO HASIL PENGECORAN EVAPORATIVE. Jurnal Tugas Akhir Mahasiswa, 1(2745–6331), 95–102.

Kepakisan, K. A. K., & Siswanto, R. (2019). PENGARUH MEDIA PENDINGIN DAN WAKTU TUNGGU TERHADAP POROSITAS, KEKERASAN DAN STRUKTUR MIKRO MATERIAL AL PADUAN (RONGSOKAN) MENGGUNAKAN METODE PENGECORAN EVAPORATIVE. Jurnal Tugas Akhir Mahasiswa, 4(2745–6331), 23–32.

Ponco K.S, R., Siahaan, E., & Darmawan, S. (2016). PENGARUH UNSUR SILIKON PADA ALUMINIUM ALLOY (Al – Si) TERHADAP SIFAT MEKANIS DAN STRUKTUR MIKRO. Jurnal Ilmiah Teknik Mesin Poros, 14(2442–4501), 1–78.

Prakoso, D. A. (2021, Agustus 18). STUDI PENGECORAN ALUMINIUM DENGAN METODE GRAVITY DIE CASTING DAN GRAVITY INVESTMENT CASTING TERHADAP DENSITY, POROSITAS, STRUKTUR MIKRO DAN KEKERASAN. Institutional Repository Universitas Muhammadiyah Surakarta, 1–10.

Purkuncoro, A. E., & Taufik, A. (2016). ANALISIS PERBANDINGAN MODEL CACAT CORAN PADA BAHAN BESI COR DAN ALUMINIUM DENGAN VARIASI TEMPERATUR TUANG SISTEM CETAKAN PASIR. Jurnal Teknik Industri, 6(2615–3866), 38–44.

Purwanto, H., Darmanto, Kholis, N., & Mufidin, W. (2021). Pengaruh Variasi Temperatur Tuang pada Pengecoran Daur Ulang Al-Si terhadap Struktur Mikro dan Kekerasan dengan Pola Styrofoam. Jurnal Material dan Proses Manufaktur, 5(2656–5897), 43–51.

Saputra, A., Firdaus, & Gunawan, I. (2021). PENGARUH VARIASI MEDIA PENDINGIN OLI, DROMUS, MINYAK SAYUR TERHADAP KEKASARAN PERMUKAAN BAJA SS-400 PADA PROSES MESIN BUBUT KONVENSIONAL (LATHE MACHINE). MACHINERY JURNAL TEKNOLOGI TERAPAN, 2 (1)(2776-673X), 45–51. https://doi.org/https://doi.org/10.5281/zenodo.4748670

SUN, S., YUAN, B., & LIU, M. (2012). Effects of moulding sands and wall thickness on microstructure and mechanical properties of Sr-modified A356 aluminum casting alloy. Dalam Transactions of Nonferrous Metals Society of China: Vol. 22 (8). Elsevier. https://doi.org/https://doi.org/10.1016/S1003-6326(11)61402-7

Wibowo, A., Anggono, J., & Risonarta, V. Y. (2017). Modifikasi dimensi desain Runner dan Sprue Well pada Gravity Die Casting Timah Putih untuk Mengurangi Waste Material dan Porositas. http://download.garuda.kemdikbud.go.id/article.php?article=1235748&val=6502&title=MODIFIKASI%20DIMENSI%20DESAIN%20RUNNER%20DAN%20SPRUE%20WELL%20PADA%20GRAVITY%20DIE%20CASTING%20TIMAH%20PUTIH%20UNTUK%20MENGURANGI%20WASTE%20MATERIAL%20DAN%20POROSITAS

Winarni, S., Sunengsih, N., & Amazaina, T. G. (2017). PENERAPAN OPTIMASI MULTI RESPON DENGAN METODE GREY TAGUCHI TOPSIS. SEMINAR NASIONAL STATISTIKA FMIPA UNPAD, 6(2087–2590), 484–495.

Most read articles by the same author(s)