PENERAPAN METODE DESIGN FOR MANUFACTURING PADA RANCANG BANGUN CNC MILLING 3 SUMBU
DOI:
https://doi.org/10.5281/zenodo.8049149Keywords:
CNC Milling 3 sumbu, Design, DFMAbstract
The use of 3 Axis CNC Milling machines lately is needed by many business actors in the creative industry. However, entrepreneurs sometimes face problems with the cost of CNC Milling machines which are quite expensive. This research focuses on developing the design of 3 Axis CNC Milling machines which are commonly circulating in the market, namely 3 Axis CNC Milling 2418. Researchers develop designs using the Design For Manufacturing method in order to minimize costs but still with good quality. The CAD-CAE program, Solidworks 2021, was used to design and analyze Von Misses stresses and safety factors. The results of the implementation of the DFM method resulted in a 3 Axis CNC Milling design with a minimum cost of 11.9% and a Factor of Safety value of more than 1.
Downloads
References
Boothroyd G., dkk. “Introduction. In Product design for manufacture and assembly by Geoffrey Boothroyd, Peter Dewhurst, Winston A. Knightâ€. 5.th ed., pp. 1-5. 2015. M. Dekker, New York
Desphande, S. V. 2018. Design and Fabriction Of 3-Axis CNC Milling Machine. Jurnal. Engineering Research and General Science Volume 6, Issue 4, July-August, 2018. ISSN 2091-2730.
Hanggayuh, SH. Analisis Finite Element Pada Struktur Mesin Micromilling Dengan Material Aluminum, Cast Iron, Steel, Dan Stainless Steel. 2014. PhD Thesis. Universitas Gadjah Mada.
Hasibuan, dkk. 2019. Rancang Bangun Mesin CNC Milling 3 Axis Untuk Anggrave Pcb Berbasis Arduino Uno. Jurnal Rancang Bangun Mesin CNC. Politeknik Negeri Lhokseumawe. Aceh. ISSN 2581-2890.
Irawan, M., dkk. 2021. Penerapan Metode DFMA Dirancang Bangun Rangka Purwarupa Mesin Potong Plasma. Prosiding SNRTM, Volume 01 Desember 2021, pp. 1-6, e-ISSN: 2809-5588.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
