PENINGKATAN AKURASI DIMENSI DAN TINGKAT KEKERASAN PADA FILLAMENT ESTEEL DENGAN PENDEKATAN METODE TAGUCHI

Authors

  • Icvan Apriansyah Jurusan Teknik Mesin Politeknik Negeri Sriwijaya
  • Ahmad Zamheri
  • Fatahul Arifin

DOI:

https://doi.org/10.5281/zenodo.4748423

Keywords:

3D Printing, Akurasi Dimensi, kekerasan, Taguchi

Abstract

3D Printing is a new breakthrough in the world of technology. This breakthrough is very popular in all parts of the world, especially among academia and industry. The emergence of 3D Printing technology is very influential in several industrial fields, especially from an economic perspective. Rapid prototyping of mechanical components with techniques and low production volumes to quickly produce prototypes. The purpose of this study was to determine the dimensional accuracy of the 3D printer process using different parameters. In the testing process using the Digimatic Vernier Caliper Mitutoyo Absolute test tool, which uses an accuracy of 0.02 mm and the ALBERT GNHEM HORGEN hardness test tool and the Mitutoyo PJ-A3000 Projector Profile. The test data were analyzed using the Taguchi method.

Author Biography

Icvan Apriansyah, Jurusan Teknik Mesin Politeknik Negeri Sriwijaya

Bidang Manufaktur, Desain Produk, 3D Printing

References

Wirda Novarika, Muchtar Ginting, Almadora Anwar Sani, & Dicki Astra. (2019). PENGARUH Parameter Proses Rapid Prototyping Dengan Teknologi Stereolithography Terhadap Kekerasan Spesimen Uji. Austenit, 11(2), 27–32. http://dx.doi.org/10.5281/zenodo.4547799

Jenarthanan, M. P., & Jeyapaul, R. (2018). Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method. International Journal of Engineering, Science and Technology. https://doi.org/10.4314/ijest.v5i4.3

Pham D, Gault R.., 1998. A comparison of rapid prototyping technologies, IntJ Mach Tools Manuf., 1998;38:1257–87

Soejanto, I. 2009, Desain Eksperimen Dengan Metode Taguchi, Graha Ilmu, Yogyakarta.

Tontowi, A, E., et al., 2017. Optimization of 3D-Printer Process Parameters for Improving Quality of Polylactic Acid Printed Part, International Journal of Engineering and Technology (IJET), Vol 9 No 2 Apr-May 2017

Wang, J., Xie, H., Weng, Z., Senthil, T., dan Wu, L. 2016. A Novel Approach to Improve Mechanical Properties of Parts Fabricated by Fused Deposition Modeling. Materials and Design 105 (2016): 152–159.

Arifin, Fatahul., Arnoldi, D., Sundari, Ella., Putri, Fenoria., Agasa, F., Ramadhan, Y., Susetyo, G., Herlambang, Y. D. (2020). Studi analisis simulasi kekuatan beban pada alat bantu pembuatan lubang dengan sudut kemiringan 45 derajat. None, Jurnal Polimesin

Downloads

Published

2021-02-26