PENGARUH DIAMETER PIPA DAN LUBANG BAKAR PADA TUNGKU PEMBAKARAN TEMPURUNG KELAPA DENGAN METODE PIROLISIS
DOI:
https://doi.org/10.5281/zenodo.6857577Keywords:
Coconut Shell Charcoal, Moisture Content And Ash Content, Pyrolysis, ANOVA; Factorial type 2, FurnacesAbstract
Coconut shell charcoal is a product obtained from imperfect combustion of coconut shells causing complex carbon compounds not to oxidize into carbon dioxide. This event is pyrolysis. This study aims to determine the influence of pipe diameter parameters and burn hole diameter on water content and ash content of coconut shell charcoal which test specimens are made using pyrolysis method combustion furnace. The test result data was analyzed using ANOVA with 2 FI full factorial design, using 2 factors and 2 responses modeled by Design-Expert (Trial) software. The results of the analysis revealed that the main factor that most influenced the moisture content and ash content of the test specimen was the pipe diameter factor. The contribution of the influence of pipe diameter on water content is 47% and the contribution of pipe diameter influence to ash content of 56%.
Downloads
References
Hadi, R.2011. “Sosialisasi Teknik Pembuatan Arang Tempurung Kelapa Dengan Pembakaran Sistem Suplai Udara Terkendaliâ€. Buletin Teknik Pertanian Vol. 16, No.2. http://203.190.37.42/publikasi/bt16211j.pdf
Hudaya, N., Hartoyo.1990. “Pembuatan Arang Rendeman Tinggi Dari Tempurung Kelapa Dengan Kiln Drumâ€.Jurnal Penelitian Hasil Hutan. Vol. 7, N0.4. http://ejournal.forda-mof.org/ejournal-litbang/index.php/JPHH/article/view/3462/2998
Mardijanto, M.2018. “Perancangan Berbasis Green Ergonomic : Tungku Pembuat Arang Ramah Lingkunganâ€. https://edoc.uii.ac.id/bitstream/handle/123456789/6344/PDF.pdf? sequence=1&isAllowed=y
Soolany, C. Fadly.2020. “Rancang Bangun Dan Uji Kinerja Tungku Drum Kiln Pada Proses Produksi Arang Kulit Durian Sebagai Alternatif Bahan Bakarâ€.Jurnal Ilmiah Teknik Mesin, Vol.6. http://ejournal.uika-bogor.ac.id/index.php/ame/article/view/3259/1972
Soolany, C. 2018. “Kajian Pengunaan Drum Kiln Pada Proses Produksi Arang Dari Tempurung Kelapaâ€. JTI - UNUGHA, Vol.1 (No.1).
Sampurno, R. D., Homzah, O. F., Suryana, D., Sani, A. A., & Alexander, W. (2021). PEMANFAATAN LIMBAH ASAP DARI BATOK KELAPA DENGAN MESIN PENYULING ASAP CAIR DI KABUPATEN BANYUASIN. AUSTENIT, 13(1), 18–22. https://doi.org/10.5281/zenodo.4741709
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
