RANCANG BANGUN ALAT CETAK SEAL APAR CHUBB 6 KG POWDER (Ø32.60 MM & Ø11.40 MM) MENGGUNAKAN SISTEM HIDROLIK (PENGUJIAN PERFORMA)

Main Article Content

Novriadi Muhammad
Dwi Arnoldi
Fatahul Arifin

Abstract

In today's modern industry, there are many manufacturing machines of various types and different functions. A manufacturing machine is a tool that serves to facilitate the manufacture of components of an object. This study has a goal, namely to create an innovation in the world of mechanical engineering, especially in the field of compression molding with a hydraulic system using a bottle jack as the suppression system.The design of this seal press molding tool was designed and made by researchers in such a way with the aim that the tool can work optimally without failure. Testing on this tool is in the form of testing the performance of the jack with a pressure gauge installed and the production process which aims to determine the limits of the jack's ability in the production process in the hope of producing a perfect and precise o-ring seal.

Downloads

Download data is not yet available.

Article Details

How to Cite
Muhammad, N., Arnoldi, D., & Arifin, F. (2022). RANCANG BANGUN ALAT CETAK SEAL APAR CHUBB 6 KG POWDER (Ø32.60 MM & Ø11.40 MM) MENGGUNAKAN SISTEM HIDROLIK (PENGUJIAN PERFORMA). MACHINERY: Jurnal Teknologi Terapan, 3(3), 99–104. https://doi.org/10.5281/zenodo.7246873
Section
Articles

References

Al Haramain, Muhammad, Dkk, 2017. Perancangan silinder hidrolik pada mesin molding karet dengan kapasitas 25 ton. Diakses dan diunduh pada 8 januari 2022, Dari Jurnal Mesin Teknologi (SINTEK Jurnal) Volume 11 No. 1 Juni 2017.

Arifin, Fatahul, dkk 2021. Optimization of the micro molding of a biconcave structure. Diakses dan diunduh pada 8 januari 2022, Dari International Journal of Technology 10(2): 269-279.

Arifin, Fatahul. Dkk 2022. Desain Alat Penepat Pengelasan KIT Pemadam Kebakaran. Diakses dan diunduh pada 15 Mei 2022. Dari JURNAL AUSTENIT VOLUME 14, NOMOR 1, APRIL 2022.

Arifin, Fatahul. Dkk, 2019. Optimization of Molding Parameters for a Micro Gear with Taguchi Method. Diakses dan diunduh pada 12 januari 2022. Dari Min-Wen Wang et al 2019 J. Phys.: Conf. Ser. 1167 012001 Min-Wen Wang et al 2019 J. Phys.: Conf. Ser. 1167 012001.

Hasanah, Uswah. 2020. Pengaruh Tekanan Compression Moulding terhadap Kinerja Pelat Bipolar Komposit Grafit/Resin Epoksi Komposisi 20% Karbon Tempurung Kelapa. Diakses dan diunduh pada 20 januari 2022. Dari Jurnal Mekanik Terapan vol 01 no 01 (2020), hal 071-080.

Nugroho, Setyo. 2018. Desain Perencanaan Ulang alat pres karet seal 4 tumpuan dengan sistim hidrolik. Diakses dan diunduh pada 11 januari 2022. Dari Jurnal Universitas 17 Agustus 1945 Surabaya Volume 1 No. 1 (2018).

Most read articles by the same author(s)