ANALYSIS OF WATER ABSORPTION AND BENDING STRENGTH JUKUNG INDUSTRY WOOD SAWDUST COMPOSITES
DOI:
https://doi.org/10.53893/austenit.v16i2.9456Keywords:
Flexural Strength, Wood Sawdust Waste, Mesh Size, Water Absorbency, Wood PowderAbstract
The purpose of the study was to determine the parameters of water absorption and bending strength, with variations in mesh size and volume of sawdust. The powder particles used were 20 mesh and 80 mesh with 70% and 80% wood powder volume variations. Bending test specimens were made using ASTM D790-02 standard and water absorption using SNI 03-2105-2006 standard. The Water Absorbency value is best in specimen BX (70% sawdust, 80 mesh) with a water absorption addition value of 0.43% and the lowest value in variation AY (80% sawdust, 20 mesh) of 0.76%. From the Anova test results, the value of Fhitung mesh size and Fhitug volume of sawdust Fhitung ˃ Ftabel = (Ha) which means it has an effect. Water absorption is influenced by mesh size by 35.59% and wood powder volume by 59.88%.The highest flexural strength value in specimen BX (70% sawdust, 80 mesh) with a flexural strength value of 59.34 MPa and the lowest value in variation BY (80% sawdust, 80 mesh) of 33.37 MPa. From the Anova test results, the value of Fhitung wood powder volume Fhitung ˃ Ftabel = (Ha) which means it has an effect. While the mesh size is Fhitung < Ftabel = (H0) which means there is un effect. Flexural strength is influenced by mesh size by 2.60% and wood powder volume by 83.05%.
Downloads
References
Desiasni, R., Chandra, R., & Widyawati, F. (2021). Pengaruh volume limbah serbuk kayu jati (Tectona grandis) terhadap daya serap air pada komposit partikel dengan matriks epoksi. Jurnal Tambora, 5(2), 74-78. https://doi.org/10.36761/jt.v5i2.1128
Diana, L., Safitra, A. G., & Ariansyah, M. N. (2020). Analisis kekuatan tarik pada material komposit dengan serat penguat polimer. Jurnal Engine: Energi, Manufaktur, dan Material, 4(2),59-67. https://doi.org/10.30588/jeemm.v4i2.754
Fathoni, S. N., & Rohmawati, L. (2023). Sifat Fisik Dan Mekanik Komposit Berpenguat Serat Alam. Jurnal Inovasi Fisika Indonesia (IFI), 12(3), 63-69. https://doi.org/10.26740/ifi.v12n3.p63-69
Hasan, A., Yerizam, M., & Kusuma, MN. (2020). Papan Partikel Ampas Tebu (Saccharum Officinarum) Dengan Perekat High Density Polyethylene. Jurnal Kinetika Vol. 11, No. 03 (November 2020) : 8-13. https://jurnal.polsri.ac.id/index.php/kimia/article/view/3094
Islamuddin, N., & Soedarmadji, W. (2020). Analisa Uji Tekan, Kerapatan Densitas Dan Mikrostruktur Terhadap Komposit Bahan Baku Teakwood Serbuk Gergaji Kayu. Journal Mechanical and Manufacture Technology (JMMT), 1(2), 58-65. https://jurnal.yudharta.ac.id/v2/index.php/jmmt/article/view/2316
Laksono, AD, Rozikin, MN, Pattara, NAS, & Cahyadi, I. (2021). Potensi Serbuk Kayu Ulin dan Serbuk Bambu Sebagai Aplikasi Papan Partikel Ramah Lingkungan-Review. Jurnal Rekayasa Mesin , 12 (2), 267-274. https://doi.org/10.21776/ub.jrm.2021.012.02.4
Mawardi, I., Nurdin, N., Jannifar, A., Fakhriza, F., & Razak, H. (2024, April). Pengaruh Ukuran Partikel Ampas Tebu Komposit Expanded Polystyrene Terhadap Perilaku Serapan Air dan Kuat Tarik Sekrup. In Prosiding Seminar Nasional Politeknik Negeri Lhokseumawe (Vol. 7, No. 1, pp. 1-4). https://e-jurnal.pnl.ac.id/semnaspnl/article/view/5094
Nayan, A., & Hafli, T. (2022). Analisa Stuktur Mikro Material Komposit Polimer Berpenguat Serbuk Cangkang Kerang. Malikussaleh Journal of Mechanical Science and Technology, Vol 6 No. 1, 15-24. https://doi.org/10.29103/mjmst.v6i1.8184
Rahman, M. B. N., Sudarisman, S., & Nugroho, E. (2018). Pengaruh Ukuran Butir, Fraksi Volume dan Penambahan Aseton terhadap Kekuatan Flexural Komposit Papan Partikel Serbuk Gergaji Kayu Sengon-Matrik Polyester. JMPM (Jurnal Material dan Proses Manufaktur), Vol 2 No. 2, 110-118. https://doi.org/10.18196/jmpm.2227
Rahmanto, M. H., & Palupi, A. E. (2019). Analisa Kekauatan Tarik Dan Impak Komposit Berpenguat Serat Kelapa Dan Tebu Dengan Perendaman Naoh Dan Menggunakan Resin Polyester. Jurnal teknik mesin, Vol 7 No 3, 31-40. https://ejournal.unesa.ac.id/index.php/jtm-unesa/article/view/30688
Sudjana. (1994). Desain dan Analisis Ekperimen. Bandung; Tarsito.
Suheri, & Farida R Wargadalem. (2023). Perahu Tongkang dan Kehidupan Masyarakat Desa Kemang Bejalu. Panalungtik, Vol 6 No. 01 (2023), 38–56. https://doi.org/10.55981/panalungtik.2023.1684
Sulaksono, B., & Kurniawan, Y. (2022). Perancangan Konsep Mesin Mixer dan Press Serbuk Kayu yang Portable untuk Pembuatan Papan Partikel dengan Metode VDI 2221. Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, 12(2), 123-127. https://doi.org/10.35814/teknobiz.v12i2.3621
Widyawati, F., & Monica, R. (2022). Indonesia Pengaruh Ukuran Partikel terhadap Sifat Fisik Dan Mekanik Komposit Limbah Gergaji Kayu Jati Dengan Matrik Resin Epoxy: Pengaruh Ukuran Partikel terhadap Sifat Fisik Dan Mekanik Komposit Limbah Gergaji Kayu Jati Dengan Matrik Resin Epoxy. Hexagon, Vol 3 No.1, 46-52. https://doi.org/10.36761/hexagon.v3i1.1467
Widyawati, F., & Tanjung, R. (2023). Pengaruh Konsentrasi NaOH Terhadap Kekuatan Fisik, Mekanik Dan Morfologi Komposit Berpenguat Serbuk Kayu Sengon (Albizia Chinensis)-Resin Epoxy. Segi enam , Vol 4 No.1, 29-39. : https://doi.org/10.36761/hexagon.v4i1.2256
Yunus, M., Arnoldi, D., & Prakarsa, C. P. (2020). Pembuatan Dan Pengujian Sifat Mekanik Komposit Bahan Serat Fiberglass Dan Serat Daun Nanas Dengan Matrik Resin Polyester Pada Panel Panjat Dinding. Austenit, 12(1),21–27. https://jurnal.polsri.ac.id/index.php/austenit/article/view/1992
Zamheri, A., Seprianto, D., Sailon., Tamilio, H., Andika, E., & Ramadoni, R. (2023). Pengaruh Fraksi Volume Dan Orientasi Pada Komposit Serat Gambas Serta Tebu Terhadap Kekuatan Bending. Jurnal.polsri.ac.id Austenit Volume. 15 No.1, 1-7. https://doi.org/10.53893/austenit.v15i1.5188
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Authors and Publisher
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
