PENERAPAN SISTEM REFRIGERASI PADA ALAT PEMBUAT ASAP CAIR UNTUK PENGOPTIMALAN HASIL PRODUKSI

Main Article Content

Herlin Sumarna
Haryanto .
Baiti Hidayati
Ozkar F Homzah

Abstract

Recently, liquid smoke is widely used for various needs, both for food purposes and for freezing rubber latex. Liquid smoke began to grow due to the large demand, also using biomass / waste as a base material. Immediate production results are needed by the condensation process. The application of the refrigeration system guides the temperature of the air which is used as a cooling medium in the condensation process during the process of making liquid smoke. This study uses coconut shell as raw material for pyrolysis, and there are 4 temperature variations that are applied in the liquid smoke production process. First without a refrigeration system, the application of a refrigeration system with temperature variations of 22 ° C, 18 ° C and the last one is 15 ° C. The data is taken every 30 minutes for 6 hours. Based on the research results, it was found that the maximum production results using the refrigeration system at an air temperature of 15 ° C, resulted in 375 ml of liquid smoke. Keywords: Liquid Smoke, Refrigeration, Pyrolysis, Coconut Shell

Downloads

Download data is not yet available.

Article Details

How to Cite
Sumarna, H., ., H., Hidayati, B., & Homzah, O. F. (2020). PENERAPAN SISTEM REFRIGERASI PADA ALAT PEMBUAT ASAP CAIR UNTUK PENGOPTIMALAN HASIL PRODUKSI. AUSTENIT, 12(2), 38–42. https://doi.org/10.5281/zenodo.4547838
Section
Articles

References

Hidayat dan Qomaruddin. 2015. Analisa Pengaruh Temperatur Pirolisis Dan Bahan Biomassa Terhadap Kapasitas Hasil Pada Alat Pembuat Asap Cair. Prosiding SNST ke-6.

Jayanudin dan Suhendri. 2012. Identification Of Chemical Components Liquid Smoke From Coconut Shell Region Anyer Banten. Jurnal Agroekotek 4 (1) : 39-46

Miller, Rex . 2009. HVAC Troubleshooting Guide. The McGraw-Hill Companies. New York Chicago San Franciaco Lisbon London Madrid.

Mustafiah, Makhsud, dan Aladin. 2016. Pengaruh Suhu Terhadap Produksi Asap Cair dari Blending Limbah Biomassa Cangkang Sawit dengan Batubara secara Pirolisis. Journal Of Chemical Process Engineering. Vol.01, No.01, ISSN = 2527-4457

Rasi., A. J. L. dan Seda, Y.P. Potensi Teknologi Asap Cair Tempurung Kelapa.

Ratnawati dan Singgih Hartanto. 2010. Pengaruh Suhu Pirolisis Cangkang Sawit Terhadap Kuantitas Dan Kualitas Asap Cair. Indonesian Journal Of Materials Science. Vol. 12, No. 1, hal : 7 - 11, ISSN : 1411-1098

Yusrizal dan Idris., M. 2016. Pengujian Pirolisis Kayu Dengan Metode Hampa Udara Untuk Memproduksi Bahan Bakar Gas. Jurnal Inotera Vol. 1, No. 1.