THE EFFECT OF VOLUME FRACTION AND ORIENTATION OF GAMBAS FIBER COMPOSITES AND SUGARCANE ON BENDING STRENGTH

Article Sidebar

PDF (Bahasa Indonesia)
Published: Apr 30, 2023
DOI: https://doi.org/10.5281/zenodo.7882133
Keywords:
composite, gambas fiber, sugarcane fiber, volume fraction, Fiber orientation

Main Article Content

Ahmad Zamheri
Politeknik Negeri Sriwijaya
Dicky Seprianto
Politeknik Negeri Sriwijaya
Sailon Sailon
Politeknik Negeri Sriwijaya
Hopay Tamilio
Politeknik Negeri Sriwijaya
Ekki Andika
Politeknik Negeri Sriwijaya
Rizki Ramadoni
Politeknik Negeri Sriwijaya

Abstract

The purpose of this study is to determine the influence of volume fractions and orientation directions on the composite of gambas fiber and sugarcane fiber on bending strength. In this study, the variation in the volume fraction of resin, gambas fiber, and sugarcane fiber was (Resin 60%: Sugarcane Fiber 20%: Gambas Fiber 20%), (Resin 70%: Sugarcane Fiber 15%: Gambas Fiber 15%), and (Resin 80%: Sugarcane Fiber 10%: Gambas Fiber 10%) with the orientation direction of gambas fiber and sugarcane fiber 90°/90°, 90°/45°and 90°/0°. In this test, the bending test specimen was made according to the ASTM D 790-02  standard and the test result data were analyzed using the Two-Way ANOVA method assisted by Microsoft Exel software. This study showed that the volume fraction (Resin 60%: Sugarcane Fiber 20%: Gambas Fiber 20%) and the orientation direction of gambas fiber and sugarcane fiber 90°/90° have  the best bending strength  which is 48.33 (N/,) this value is higher than that of Multiplex with a bending strength value of  26,60 MPa.

Downloads

Download data is not yet available.

Article Details

How to Cite
Zamheri, A., Seprianto, D. ., Sailon, S., Tamilio, H., Andika, E., & Ramadoni, R. . (2023). THE EFFECT OF VOLUME FRACTION AND ORIENTATION OF GAMBAS FIBER COMPOSITES AND SUGARCANE ON BENDING STRENGTH. AUSTENIT, 15(1), 1–7. https://doi.org/10.5281/zenodo.7882133
Issue
Vol. 15 No. 1 (2023): AUSTENIT 15012023
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.

References

Boimau, K., Selan, R. N., & Manimalay, D. A. (2021). Pengaruh Perlakuan Alkali dan Orientasi Serat Buah Patola Terhadap Sifat Impak Komposit Poliester. JTERA (Jurnal Teknologi Rekayasa), 6(1), 101. https://doi.org/10.31544/jtera.v6.i1.2021.101-108

Darmansyah, D., … J. T.-… dan A. T., & 2018, U. (2018). Sintesis MekanikKomposit Epoxy Berpenguat Serat Tebu (Tinjauan Pengaruh Fraksi Volume Serat Terhadap Kekuatan Tarik dan Kekuatan Bending). Repository.Lppm.Unila.Ac.Id, 149–156. http://repository.lppm.unila.ac.id/id/eprint/8088

Fakhrin, H. (2019). Pemanfaatan Serat Tebu Sebagai Penguat Pada Komposit Dengan Matriks Polyester Untuk Pembuatan Papan Skateboard [UNIVERSITAS MUHAMMADIYAH SUMATERA UTARA]. http://repository.umsu.ac.id/handle/123456789/7643

Kosjoko. (2017). Pengaruh Perlakuan Alkali Terhadap Kekuatan Tarik dan Bending Bahan Komposit Serat Bambu Tali (Gigantochloa Apus) Bermatriks Polyester. Jurnal.Unmuhjember.Ac.Id, 171–178. http://jurnal.unmuhjember.ac.id/index.php/SENSEI17/article/view/1063

Latuconsina, M. F., & Priyahapsara, I. (2021). BENDING STRENGTH OF HYBRID COMPOSITE OF GLASS AND NATURAL FIBER PHINEAGE LEAVES. Vortex, 2(2), 89. https://doi.org/10.28989/vortex.v2i2.1012

Mentari, F. S. D., Yuanita, & Roby. (2021). Pembuatan Kompos Ampas Tebu dengan Bioaktivator MOL Rebung Bambu. Buletin Poltanesa, 22(1), 1–6. https://doi.org/10.51967/tanesa.v22i1.333

Novita, D., Syamsuddin, T., & Giawa, A. (2020). RESPON PERTUMBUHAN DAN PRODUKSI TANAMAN GAMBAS (Luffa acutangula L. Roxb) TERHADAP PEMBERIAN Trichoderma sp. DAN BEBERAPA DOSIS PUPUK KANDANG KOTORAN SAPI. AGRONITAS, 2(2), 46–53. https://doi.org/10.51517/ags.v2i2.236

Purnama, H., Purnomo, J., & Wibowo, T. Y. (2013). Pengaruh Jenis Serat Terhadap Kuat Tarik dan Kuat Benturan Pada Material Komposit Resin Epoksi. Prosiding Simposium Nasional Rekayasa Aplikasi Perancangan Dan Industri, 64–69. http://hdl.handle.net/11617/4166

Sudargo, P., Suhardoko, & Teguh, B. B. (2015). Pengaruh Fraksi Volume dan Panjang Serat Terhadap Sifat Bending Komposit Poliester yang Diperkuat Serat Limbah Gedebog Pisang. Prosiding SNST Fakultas Teknik, 1(1), 92–96. https://publikasiilmiah.unwahas.ac.id/index.php/PROSIDING_SNST_FT/article/view/1130/1236

Sukoco, B. A. . (2018). Komposit Skin Hybrid Berpenguat Serat Bambu Acak 50% dan Serat Rami Anyaman 50% Bermatriks Polyester terhadap Kekuatan Tarik Bending dan Impact. Publikasi Ilmiah. http://eprints.ums.ac.id/id/eprint/62664

Suryana, D., Junaidi, A., Rizki, M., Teknik, J., Produksi, M., Perawatan, D., Sriwijaya, N., Negara, J. S., & Besar, B. (2018). Pengaruh komposisi komposit serat-serat eceng gondok dan pasir silika terhadap uji impact dan uji tarik untuk point panjat dinding. Jurnal.Polsri.Ac.Id, 10(2), 56–60. https://doi.org/https://doi.org/10.5281/zenodo.4547650

Tjahjanti, P. H. (2018). Buku Ajar Teori Dan Aplikasi Material Komposit Dan Polimer. In M. P. Septi Budi Sartika & M. K. M. Tanzil Multazam , S.H. (Eds.), Buku Ajar Teori Dan Aplikasi Material Komposit Dan Polimer (1st ed.). Umsida Press. https://doi.org/10.21070/2019/978-602-5914-27-0

Yunus, M., Arnoldi, D., Cakra, M., Prakarsa, P., Program, M., Teknik, S., Produksi, M., Perawatan, D., Sriwijaya, N., Program, M., Srijaya, J., & Bukit Besar, N. (2020). PEMBUATAN DAN PENGUJIAN SIFAT MEKANIK KOMPOSIT BAHAN SERAT FIBERGLASS DAN SERAT DAUN NANAS DENGAN MATRIK RESIN POLYESTER. Jurnal.Polsri.Ac.Id, 12(1), 21–27. https://doi.org/https://doi.org/10.5281/zenodo.4547826

Zainuri, A., Sinarep, S., Purwoko, A., & Nurkaliwantoro, N. (2019). PENGARUH JENIS ANYAMAN DAN FRAKSI VOLUME SERAT TERHADAP KEKUATAN BENDING DAN IMPACT KOMPOSIT SERAT RAMI DENGAN MATRIK RESIN POLYESTER. JURNAL ILMIAH MOMENTUM, 15(2). https://doi.org/10.36499/jim.v15i2.3080

Zulfikar. (2012). Analisa Kekuatan Statik Tarik Material Komposit Polimer Serat Buah Pinang Dengan Perlakuan Perendaman Larutan NaOH 1 M 1%. Mekintek, 3(2), 224–227. http://repository.uma.ac.id/handle/123456789/11954

Most read articles by the same author(s)

1 2 3 4 > >>