RANCANG BANGUN MESIN BOR TANAH UNTUK MEMBUAT LUBANG RESAPAN AIR (BIOPORI)

Main Article Content

Sailon Sailon
Ahmad Zamheri
Romi Wilza
Zainuddin Zainuddin

Abstract

The designed biopore drill machine uses manual manual hoist / manual crank system that serves to raise and lower the drill bit. Engines that are connected to the drill bit vertically in addition to functioning to rotate the drill bit also serve as a weight so that the drill bit can enter the ground. In addition, the biopori drill machine is made of a rectangle with the aim that the machine at the time of operation becomes steady (not shifted) and the legs are wheeled in order tobe easy to move around. Biopori drill machine is a modification of existing tools, both variations of the form and additional accessories, with the aim to facilitate the operation, transfer and optimize the work with a relatively low cost and physical fitness of the operator is maintained and safety can be more.secure. This research focuses on designing the shape and size of the machine so that it is easy to operate and transfer, calculating the strength of each  component in accordance with the scientific method and testing the engine performance. The purpose of this study is expected to contribute to technology in the form of: to produce a prototype in order to enrich khasana appropriate equipment that can be utilized to help the manufacture of biopore holes, improve the quality and quantity of infrastructure equipm entresear chinstitute sustainable. In designing the build of this biopori drill first collect planning data.  A part from field data the data is taken from the literature.

Downloads

Download data is not yet available.

Article Details

How to Cite
Sailon, S., Zamheri, A., Wilza, R., & Zainuddin, Z. (2017). RANCANG BANGUN MESIN BOR TANAH UNTUK MEMBUAT LUBANG RESAPAN AIR (BIOPORI). AUSTENIT, 9(2). https://doi.org/10.5281/zenodo.4547631
Section
Articles
Author Biographies

Sailon Sailon, Politeknik Negeri Sriwijaya

Teknik Mesin POLSRI

Ahmad Zamheri, Politeknik Negeri Sriwijaya

Teknik Mesin POLSRI

Romi Wilza, Politeknik Negeri Sriwijaya

Teknik Mesin POLSRI

Zainuddin Zainuddin, Politeknik Negeri Sriwijaya

Teknik Mesin POLSRI

References

1. “Kamil R. Brata: Penemu “Lubang Resapan Biopori ” Oktober 2013 https//id.m.wikipedia.
2. Khurmi RS Gupta, JK. 2005, Text Book Of Machine Design Eurasia. Publising Houe, Ltd Ram Ngar, New Delhi.
3. Luzadder, Warren Dan Handarsin, 1991. Menggambar Teknik. Jakarta : Erlangga
4. Sularso dan Suga, Kiyokatsu, 1991, Dasar Perencanaan dan Pemilihan Bahan Elemenin Mesin, Jakarta : Pradmiya Paramita
5. http://wesjampiroiki.blogspot.co.id/2013/04/kekuatan-tanah.htm)
6. http://resapanbiopori.blogspot.co.id/2013/04/berbagai-macam-alat-biopori-dan.html
7. https://digilib.uns.ac.id/dokumen/detail/54850/Rancang-bangun-poros-dan-ulir-daya-mesin-hole-post-auger.
8. http://wesjampiroiki.blogspot.co.id/2013/04/kekuatan-tanah.html?m=1 Diakses tanggal 22 April 2017

Most read articles by the same author(s)

<< < 1 2 3 > >>