DESAIN OPTIMASI SUDU KIPAS SENTRIFUGAL
Article Sidebar
Main Article Content
Abstract
Artikel ini membahas tentang cara optimasi desain kipas sentrifugal menggunakan analisis elemen hingga dengan menggunakan Autodesk Inventor 2013. Dalam analisis kipas sentrifugal yang digunakan analisis siklus simetri. Ada dua bahan yang digunakan dalam optimasi desain yaitu; baja ringan dan baja.kekuatan tinggi paduan rendah Harapan desain di bawah 0,5 mm perpindahan dan di atas faktor 1,5 keselamatan. Hasil analisis didapat desain yang baik adalah baja kekuatan tinggi paduan rendah (high strength low alloy steel) dengan ketebalan 4 mm dan 5 mm
Downloads
Download data is not yet available.
Article Details
How to Cite
Medi, A., & Rizal, S. (2015). DESAIN OPTIMASI SUDU KIPAS SENTRIFUGAL. AUSTENIT, 7(2). https://doi.org/10.5281/zenodo.4547543
Section
Articles
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
References
1. …….,http://centrifugalfanengineering.blogspot.tw/2013/01/basic-design-of-centrifugalfan.html, diundu 2 Januari 2014
2. J.M. Fernández Oro et. al, 2013, Numerical methodology for the assessment of relative and absolute deterministic flow structures in the analysis of impeller–tongue interactions for kipas sentrifugals, Computers & Fluids, journal homepage: www.elsevier.com/locate/compfluid
3. …….,http//www.processbarron.com/industrialfans/centrifugal-fans, retrieved January 2, 2014
4. Daryl L. Logan, 2012, A first Course in the Finite Element Method, 5th Edition, SI, University of Wisconsin-Platteville, Cengage Learning, USA
5. Thom Tremblay, 2012,Autodesk Inventor 2013 And Autodesk Inventor Lt 2013 Essential, John Willy and Sons, Indianapolis, Indiana
6. ….…, http//www.halifax-fan.co.uk, retrieved January 2, 2014
2. J.M. Fernández Oro et. al, 2013, Numerical methodology for the assessment of relative and absolute deterministic flow structures in the analysis of impeller–tongue interactions for kipas sentrifugals, Computers & Fluids, journal homepage: www.elsevier.com/locate/compfluid
3. …….,http//www.processbarron.com/industrialfans/centrifugal-fans, retrieved January 2, 2014
4. Daryl L. Logan, 2012, A first Course in the Finite Element Method, 5th Edition, SI, University of Wisconsin-Platteville, Cengage Learning, USA
5. Thom Tremblay, 2012,Autodesk Inventor 2013 And Autodesk Inventor Lt 2013 Essential, John Willy and Sons, Indianapolis, Indiana
6. ….…, http//www.halifax-fan.co.uk, retrieved January 2, 2014