OPTIMIZATION OF HARDENING AISI 1045 AS MATERIAL FOR CANE CUTTER BLADES USING THE TAGUCHI METHOD

Article Sidebar

PDF (English)
Published: Oct 31, 2022
DOI: https://doi.org/10.5281/zenodo.7265871
Keywords:
Hardening, Cane Cutter Blades, Taguchi method, AISI 1045, Rockwell

Main Article Content

Indra Gunawan
Politeknik Negeri Sriwijaya
Fenoria Putri
Politeknik Negeri Sriwijaya
Soegeng Witjahjo
Politeknik Negeri Sriwijaya
Harry Mushafiqih
Mahasiswa Prodi Sarjana Terapan TMPP, Politeknik Negeri Sriwijaya

Abstract

PT. X is a company that manufactures sugar. The situation of firm X cannot be described as ideal due to the need for extensive study, particularly on the cane cutter's blade. A common indication of cane cutters is a rapid rate of wear. In this study, researchers employed a qualitative technique based on the taguchi method. The taguchi approach is a modern engineering technique that strives to improve the quality of products and processes while reducing costs and maximizing resources. The taguchi experimental strategy is more effective because it permits research incorporating a large number of variables and numbers. Since a larger hardness response is preferable, the largest confirmation value is the ideal parameter value for the knife manufacturing process on the cane cutter. When measuring the hardness of the blade material on a cane cutter, temperature is a highly important component. According to the findings of the hardness test, the hardest material at a temperature of 750oC and a cooling medium of NaCl solution with a hardness value of 12.4 HRC is, and the hardest material at a temperature of 800oC and a cooling medium of NaOH solution with a hardness value of 59.7 HRC is.

Downloads

Download data is not yet available.

Article Details

How to Cite
Gunawan, I., Putri, F., Witjahjo, S., & Mushafiqih, H. (2022). OPTIMIZATION OF HARDENING AISI 1045 AS MATERIAL FOR CANE CUTTER BLADES USING THE TAGUCHI METHOD. AUSTENIT, 14(2), 75–79. https://doi.org/10.5281/zenodo.7265871
Issue
Vol. 14 No. 2 (2022): AUSTENIT 14022022
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.

References

Apriansyah I, Zamheri A and Arifin F. 2020. Peningkatan Akurasi Dimensi Dan Tingkat Kekerasan Pada Fillamen Esteel Dengan Pendekatan Metode Taguchi. Machinery Jurnal Teknologi Terapan Vol.2 No.1, February 2021 ISSN : 2776-673X (Online).

Erwinda M D and Susanto W H. 2014. Pengaruh pH Nira Tebu (Saccharum Officinarum) Dan Konsentrasi Penambahan Kapur Terhadap Kualitas Gula Merah. Jurnal Pangan dan Agroindustri Universitas Brawijaya Malang Vol. 2 No. 3 (2014).

Franando, Zamheri A and Arifin A. 2020. Studi Pembuatan Bagian Alat Rehabilitasi Penderita Stroke Dengan Pendekatan Metode Taguchi. Machinery Jurnal Teknologi Terapan Vol.1 No.1,August 2020 p-ISSN : 2723-3359.

Hanggara, Gandi. 2021. Proses Penggantian Pisau Pada Mesin Cane Cutter di PT. Buma Cima Nusantara Unit Cinta Manis. Politeknik Negeri Sriwijaya.

Illah, Husni Atok. 2020. Pengaruh Variasi Waktu Hardening Terhadap Laju Korosi Pada Baja AISI 1045 Dengan Media Air Tawar. Instutional Repository. http://eprints.umm.ac.id/id/eprint/59702. Diakses pada 20 March 2022.

Karmin. 2009. Pengendalian Proses Pengerasan Baja Dengan Metoda Quenching. Jurnal Austenit Volume 1, No. 2, October 2009.

Pramono, Agus. 2011. Karakterisrik Mekanik Proses Hardening Baja AISI 1045 Media Quenching Untuk Aplikasi Sprochet Rantai. Jurnal Ilmiah Teknik Mesin Vol. 5 No.1. April 2011 (32-38).

Renanda, Ignatyus Adhitya. 2020. Kelayakan Penggunaan Pipa Kotak Stkm 13b (50.0 X 50.0 X 2.30 X 500.0) Sebagai Rangka Otomotif Berdasarkan Sifat Mekanis. Institut Teknologi Nasional Malang. http://eprints.itn.ac.id/id/eprint/4890.

Soejanto, Irwan. 2009. Desain Eksperimen Dengan Metode Taguchi. Graha Ilmu. Yogyakarta.

Umartono A S and Awali S. 2015. Analisa Kegagalan Proses Heat Treatment Baja Sup-9 Pada Pembuatan Pegas Daun. Jurnal keilmuan dan Terapan Teknik Volume 04, No. 01, June 2015 Hal 55 - 75.

Wang M-W, Arifin F and Huang J-Y. 2019. Optimization Of The Micro Molding Of A Biconcave Structure. International Journal of Technology 10(2): 269-279 ISSN 2086-9614.

Wang M-W, Arifin F and Huynh T T-N. 2019. Optimization of Molding Parameters for a Micro Gear with Taguchi Method. Journal of Physics: Conference Series.

Wang M-W, Arifin F and Kuo H-L. 2019. Study on micromoulding of a high viewing angle LED lens. Macromolecular Engineering. https://doi.org/10.1080/14658011.2019.1685803.

Wang M-W, Arifin F, Kuo J-W and Dzwo T H. 2020. Optimal Design of Plasticizing Screw Using Artificial. Journal of Physics: Conference Series. 1500 (2020) 012022 doi:10.1088/1742-6596/1500/1/012022.

Zamheri A, Syahputra A.P and Arifin A. 2020. Studi Penyusutan Pembuatan Gigi Palsu Dengan 3d Printing Fdm Pendekatan Metode Taguchi. Jurnal Austenit Vol.12 No.2, October 2020 ISSN : 2085-1286 E-ISSN : 2622-7649.

Most read articles by the same author(s)

1 2 3 > >>