OPTIMIZATION OF HARDENING AISI 1045 AS MATERIAL FOR CANE CUTTER BLADES USING THE TAGUCHI METHOD
Main Article Content
Abstract
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
References
Apriansyah I, Zamheri A and Arifin F. 2020. Peningkatan Akurasi Dimensi Dan Tingkat Kekerasan Pada Fillamen Esteel Dengan Pendekatan Metode Taguchi. Machinery Jurnal Teknologi Terapan Vol.2 No.1, February 2021 ISSN : 2776-673X (Online).
Erwinda M D and Susanto W H. 2014. Pengaruh pH Nira Tebu (Saccharum Officinarum) Dan Konsentrasi Penambahan Kapur Terhadap Kualitas Gula Merah. Jurnal Pangan dan Agroindustri Universitas Brawijaya Malang Vol. 2 No. 3 (2014).
Franando, Zamheri A and Arifin A. 2020. Studi Pembuatan Bagian Alat Rehabilitasi Penderita Stroke Dengan Pendekatan Metode Taguchi. Machinery Jurnal Teknologi Terapan Vol.1 No.1,August 2020 p-ISSN : 2723-3359.
Hanggara, Gandi. 2021. Proses Penggantian Pisau Pada Mesin Cane Cutter di PT. Buma Cima Nusantara Unit Cinta Manis. Politeknik Negeri Sriwijaya.
Illah, Husni Atok. 2020. Pengaruh Variasi Waktu Hardening Terhadap Laju Korosi Pada Baja AISI 1045 Dengan Media Air Tawar. Instutional Repository. http://eprints.umm.ac.id/id/eprint/59702. Diakses pada 20 March 2022.
Karmin. 2009. Pengendalian Proses Pengerasan Baja Dengan Metoda Quenching. Jurnal Austenit Volume 1, No. 2, October 2009.
Pramono, Agus. 2011. Karakterisrik Mekanik Proses Hardening Baja AISI 1045 Media Quenching Untuk Aplikasi Sprochet Rantai. Jurnal Ilmiah Teknik Mesin Vol. 5 No.1. April 2011 (32-38).
Renanda, Ignatyus Adhitya. 2020. Kelayakan Penggunaan Pipa Kotak Stkm 13b (50.0 X 50.0 X 2.30 X 500.0) Sebagai Rangka Otomotif Berdasarkan Sifat Mekanis. Institut Teknologi Nasional Malang. http://eprints.itn.ac.id/id/eprint/4890.
Soejanto, Irwan. 2009. Desain Eksperimen Dengan Metode Taguchi. Graha Ilmu. Yogyakarta.
Umartono A S and Awali S. 2015. Analisa Kegagalan Proses Heat Treatment Baja Sup-9 Pada Pembuatan Pegas Daun. Jurnal keilmuan dan Terapan Teknik Volume 04, No. 01, June 2015 Hal 55 - 75.
Wang M-W, Arifin F and Huang J-Y. 2019. Optimization Of The Micro Molding Of A Biconcave Structure. International Journal of Technology 10(2): 269-279 ISSN 2086-9614.
Wang M-W, Arifin F and Huynh T T-N. 2019. Optimization of Molding Parameters for a Micro Gear with Taguchi Method. Journal of Physics: Conference Series.
Wang M-W, Arifin F and Kuo H-L. 2019. Study on micromoulding of a high viewing angle LED lens. Macromolecular Engineering. https://doi.org/10.1080/14658011.2019.1685803.
Wang M-W, Arifin F, Kuo J-W and Dzwo T H. 2020. Optimal Design of Plasticizing Screw Using Artificial. Journal of Physics: Conference Series. 1500 (2020) 012022 doi:10.1088/1742-6596/1500/1/012022.
Zamheri A, Syahputra A.P and Arifin A. 2020. Studi Penyusutan Pembuatan Gigi Palsu Dengan 3d Printing Fdm Pendekatan Metode Taguchi. Jurnal Austenit Vol.12 No.2, October 2020 ISSN : 2085-1286 E-ISSN : 2622-7649.