ANALISA PARAMETER KEKASARAN PERMUKAAN BAHAN ALUMUNIUM JENIS Al Mg Si 3.6082 DIN 1725 PADA PROSES PEMESINAN CNC MILLING
Keywords:
CNC Milling, Al Mg Si 3.6082 DIN 1725, surface roughness, linier regressionAbstract
Machining process will produce a good product / work in accordance with the instructions specified by the finishing process, while still a lot of operator / mechanic machine tools are still faced with determining machining parameters such as cutting speed, feed rate, and the dept of cut.Melalui results of this study expected to contribute a measure of optimal parameters in CNC operations carried out by means of experiments Milling.Penelitian Al Mg Si material 3.6082 DIN 1725 using a CNC Milling. Any specimen that has been done on a CNC Milling with three variations of cutting speed, feed rate, and the dept of cut measured surface roughness (Ra). From the results of further experimental data are analyzed with regression models to obtain mathematical models. Mathematical models that produced a regression equation Y = 0.880-0.001 n- 0.004 f + 0.316 a 69.8% level of eligibility.Downloads
Download data is not yet available.
References
1. Chang-Xue. (2002), Surface Roughness Predictive Modeling: Neural Networks versus Regression. Departmen of Industrial & Manufacturing Engineering, College of Engineering and Technology Bradley University: Illinois USA.
2. Huang L, Chen, J.C, 2001, A Multiple
Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer, Journal of Industial Technology,Vol. 17, No. 2, February to April 2001, http://www.nait.org.
3. Hando o, B. Tulun Prayo o, (2012), “ Studi Parameter Pemesinan Optimum Pada Operasi CNC End Milling Finishing Bahan Alumunium:,Universitas Gajah Mada, http://www.scribd.com/doc/25352002/Stu di-Paramater-Pemesinan-Optimum-
Pada-Operasi-Cnc, 25 Maret 2012.
4. Her an Sa utro dan Sunaryo,†Predi i
Kekasaran Permukaan Baja ST 40
Berbasis Model Analisa Regresi Ganda ada Pe e inan CNC Frai â€, Univer ita Sebelas Maret Surakarta, http://www.docstoc.com/docs/113842922
/Prediksi-Kekasaran-Permukaan-Baja- ST-40-Berbasis-Model-Analisa-Regresi- Ganda-Pada-Pemesinan-CNC-Frais, 25
Februari 2012
5. Jerard, R.B., et al, 2001, Online
Optomozation of Cutting Conditions for NC Machining, 2001 NSF Design, Manufacturing and Industrial Innovation Resaech Conference, January 7-10-
2001, Tampa, Florida.
6. Jonathan Sarwono, 2012,â€A li a i untu Riset Eksperi entalâ€, PT Elex Media Komputindo, Jakarta.
7. Yang, JL., Chen, JC., 2001, “A Sytematic
Approach for Identifying Optimum Surface Roughness Performance in End Milling Operationsâ€, Journal of Industrial Technology, Vol. 17, No. 2, February to April 2001, http://www.nait.org.
2. Huang L, Chen, J.C, 2001, A Multiple
Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer, Journal of Industial Technology,Vol. 17, No. 2, February to April 2001, http://www.nait.org.
3. Hando o, B. Tulun Prayo o, (2012), “ Studi Parameter Pemesinan Optimum Pada Operasi CNC End Milling Finishing Bahan Alumunium:,Universitas Gajah Mada, http://www.scribd.com/doc/25352002/Stu di-Paramater-Pemesinan-Optimum-
Pada-Operasi-Cnc, 25 Maret 2012.
4. Her an Sa utro dan Sunaryo,†Predi i
Kekasaran Permukaan Baja ST 40
Berbasis Model Analisa Regresi Ganda ada Pe e inan CNC Frai â€, Univer ita Sebelas Maret Surakarta, http://www.docstoc.com/docs/113842922
/Prediksi-Kekasaran-Permukaan-Baja- ST-40-Berbasis-Model-Analisa-Regresi- Ganda-Pada-Pemesinan-CNC-Frais, 25
Februari 2012
5. Jerard, R.B., et al, 2001, Online
Optomozation of Cutting Conditions for NC Machining, 2001 NSF Design, Manufacturing and Industrial Innovation Resaech Conference, January 7-10-
2001, Tampa, Florida.
6. Jonathan Sarwono, 2012,â€A li a i untu Riset Eksperi entalâ€, PT Elex Media Komputindo, Jakarta.
7. Yang, JL., Chen, JC., 2001, “A Sytematic
Approach for Identifying Optimum Surface Roughness Performance in End Milling Operationsâ€, Journal of Industrial Technology, Vol. 17, No. 2, February to April 2001, http://www.nait.org.
Downloads
Published
2012-04-01
How to Cite
yunus, moch, Suryana, D., & Mulyadi, M. (2012). ANALISA PARAMETER KEKASARAN PERMUKAAN BAHAN ALUMUNIUM JENIS Al Mg Si 3.6082 DIN 1725 PADA PROSES PEMESINAN CNC MILLING. AUSTENIT, 4(01). Retrieved from https://jurnal.polsri.ac.id/index.php/austenit/article/view/133
Issue
Section
Articles
License
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
