PERFORMANCE ANALYSIS OF BIO-BRIQUETTING MACHINE WITH SCREW EXTRUDER TYPE BASED ON QUALITY OF BIO-BRIQUETTES
DOI:
https://doi.org/10.53893/austenit.v15i2.7218Keywords:
Briquetting machine, screw extruder, bio-briquetteAbstract
he purpose of this study is to design a bio-briquetting machine with screw extruder type to convert biomass into higher density based on quality standard of charcoal briquette SNI 01-6235-2000 and SNI 19-4791-1998. The machine had production capacity of 30 kg/hour, equipped with the motor of 1 HP which transmitted to the machine through pulley and belt, and also has cutter which rotates continuously. The raw materials of the bio-briquette were using bagasse and coconut shells. There are 6 parameters that are used to test the quality of bio-briquette such as calorific value, inherent moisture, ash content, dependability pressure, volatile matter content, and fixed carbon content. The bio-briquette was made from the raw materials using amylum adhesives with ratio 30:70:30. With feed as 5 kg, the machine produced 50 pieces of bio-briquette. The machine could produce good bio-briquettes such as calorific value of 6,511.3 cal/g, inherent moisture of 1.97%, ash content of 5.88%, volatile matter of 27.71%, fixed carbon content of 64.99% and compressive strength was 16.98 kg/cm2.
Downloads
References
Brunerová, Anna, RoubÃk, Hynek, and Brožek, Milan. (2018). Bamboo fiber and sugarcane skin as a bio-briquette fuel. Energies, 11(9), 2186. https://doi.org/10.3390/en11092186
Ifa, L., Yani, S., Nurjannah, N., Darnengsih, D., Rusnaenah, A., Mel, M., ... & Kusuma, H. S. (2020). Techno-economic analysis of bio-briquette from cashew nut shell waste. Heliyon, 6(9). https://doi.org/10.1016/j.heliyon.2020.e05009
Ţenu, I., Roman, C., Senila, L., Roşca, R., Cârlescu, P., Băetu, M., ... & Corduneanu, O. R. (2021). Valorization of vine tendrils resulted from pruning as densified solid biomass fuel (Briquettes). Processes, 9(8), 1409.
https://doi.org/10.3390/pr9081409
Kpalo, Sunday Yusuf, Zainuddin, M. F., Manaf, Latifah Abd, and Roslan, A. M. (2020). A review of technical and economic aspects of biomass briquetting. Sustainability, 12(11), 4609. https://doi.org/10.3390/su12114609
Krisna, Pratama Pela, Taufikurahman and Sundari, Ella. (2020). STUDI EKSPERIMENTAL: ANALISA KEGAGALAN RODA GIGI PADA GEAR BOX MESIN SCREW PRESS KELAPA SAWIT. AUSTENIT, 12(2), 54-58.
https://doi.org/10.5281/zenodo.4547906
Nasional, Badan Standar (2000). Standar Nasional Indonesia Briket Arang Kayu (SNI 1-6235-2000).
Nasional, Badan Standar. (1998). Standar Nasional Indonesia Serbuk Sabut Kelapa (SNI 19-4791-1998).
Papuangan, N., & Jabid, A. W. (2019, May). Pre-design of bio-briquette production using kenari shell. In IOP Conference Series: Earth and Environmental Science (Vol. 276, No. 1, p. 012051). IOP Publishing. http://doi.org/10.1088/1755-1315/276/1/012051
Sanchez, Philip D. C., Aspe, Mia M. T., & Sindol, Kenneth N. (2022). An Overview on the Production of Bio-briquettes from Agricultural Wastes: Methods, Processes, and Quality. Journal of Agricultural and Food Engineering, 1, 2716-6236. http://doi.org/10.37865/jafe.2022.0036
Saputro, Erwan Adi, Laksminingsih, Arieanthi, Mardiansyah, Yuda Eka, Yogaswara, Rachmad, Ramadhan, and Erliyanti, Nove, K. (2020). Utilizing organic waste (sugarcane bagasse and sugarcane leaves) as bio briquettes through pyrolysis process. Nusantara Science and Technology Proceedings, 216-220. http://dx.doi.org/10.11594/nstp.2020.0534
Tan, X. F., Liu, S. B., Liu, Y. G., Gu, Y. L., Zeng, G. M., Hu, X. J., ... & Jiang, L. H. (2017). Biochar as potential sustainable precursors for activated carbon production: Multiple applications in environmental protection and energy storage. Bioresource technology, 227, 359-372. https://doi.org/10.1016/j.biortech.2016.12.083
Tumuluru, Jaya S., Wright, Christopher T., Hess, J. Richard, & Kenney, Kevin L. (2011). A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels, Bioproducts and Biorefining, 5(6), 683-707. https://doi.org/10.1002/bbb.324
Tursi, A. (2019). A review on biomass: importance, chemistry, classification, and conversion. Biofuel Research Journal, 6(2), 962-979. http://doi.org/10.18331/BRJ2019.6.2.3
Veranika, Rita M., Madagaskar, M., and Aprianti, Tine. (2022). THE MANUFACTURE OF SUGARCANE PEELER AND SQUEEZER: PEMBUATAN MESIN PENGUPAS DAN PEMERAS TEBU. AUSTENIT, 14(1), 37-41. https://doi.org/10.5281/zenodo.6499818
Wardhana, A. T., Zamheri, Ahmad, and Puspa, Dilia. (2023). IMPLEMENTATION OF PLC BASED AUTOMATIC SORTING SYSTEM. AUSTENIT, 15(1), 36-40. https://doi.org/10.5281/zenodo.7935360
Yuliah, Y., Kartawidjaja, M., Suryaningsih, S., & Ulfi, K. (2017, May). Fabrication and characterization of rice husk and coconut shell charcoal-based bio-briquettes as alternative energy source. In IOP Conference Series: Earth and Environmental Science (Vol. 65, No. 1, p. 012021). IOP Publishing. http://doi.org/10.1088/1755-1315/65/1/012021
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Authors and Publisher
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
