ANALYSIS OF THE USE OF JIG TACK WELDING BRACKET RUBBER PAD TO IMPROVE THE ACCURACY OF THE WELDING PROCESS
DOI:
https://doi.org/10.36257/austenit.v18i1.11573Keywords:
jig, tack welding, welding accuracy bracket rubber pad, simple linear regression, bracket rubber padAbstract
The primary issue in the assembly process of bracket rubber pads is dimensional deviation caused by the manual tack welding process. This study aims to evaluate the effectiveness of using a JIG as a fixture to improve the accuracy of tack welding. The research was conducted experimentally by applying a specially designed JIG to hold components firmly in place during the welding process. Dimensional measurements of assemblies produced with and without the JIG were compared and analyzed using the simple linear regression method. The results indicate that the use of a JIG significantly reduces dimensional deviations, resulting in more stable and accurate dimensions within standard tolerances. Therefore, the application of a tack welding JIG is proven effective in enhancing welding accuracy and is recommended for mass production purposes.
Downloads
References
Almumtazah, N. A. (2021). Prediksi jumlah mahasiswa baru menggunakan metode regresi linier sederhana. Jurnal Ilmiah Matematika dan Terapan, 18, 33–35. https://doi.org/10.22487/2540766X.2021.v18.i1.15465
Amiruddin, R., & Ishak, H. (2018). Prediksi jumlah mahasiswa registrasi per semester menggunakan linear regresi pada Universitas Ichsan Gorontalo. ILKOM Jurnal Ilmiah, 10(2), 136–143. https://doi.org/10.33096/ilkom.v10i2.274.136-143
Carli, E. S. (2022). Aplikasi jig pada proses pembuatan hook untuk meningkatkan efisiensi waktu pengelasan menggunakan rotary welding: Studi kasus di industri karoseri. Jurnal Rekayasa Mesin, 325–334. https://doi.org/10.32497/jrm.v17i2.3730
Hidayat, M. F. (2022). Rancang bangun jig dan fixture komponen plat pada proses pembubutan rata di mesin CNC turning. Jurnal Ilmiah Teknik Mesin. https://doi.org/10.33558/jitm.v12i2.9905
Indrawan, R. (2024). Rancang bangun jig dan fixture suction casing untuk proses milling di mesin CNC Milling 3-Axis. Jurnal Pendidikan Teknik Mesin Undiksha, 213. https://doi.org/10.23887/jptm.v10i2.51720
Komatsu Ltd. (2015). Manual teknik HD-785-7: Desain dan spesifikasi bracket rubber pad. Komatsu Publications. https://www.komatsu.ip/en/products
Ma, S., Zhang, Y., Yang, H., Lv, J., Ren, S., & Liu, Y. (2020). Data-driven sustainable intelligent manufacturing based on demand response for energy-intensive industries. Journal of Cleaner Production, 123155. https://doi.org/10.1016/j.jclepro.2020.123155
Mohammad Anas Fikri, F. R. (2021). Rancang bangun jig and fixture untuk pengujian bending pada sambungan pengelasan fillet dan corner joint. Prosiding Seminar Nasional Penelitian & Pengabdian Kepada Masyarakat, 125. https://jurnal.poliupg.ac.id/index.php/snp2m/article/view/3185
Nugroho, E. A., & Muchlis, A. (2022). Proses pembuatan guard front idler excavator di PT. Sinar Perkasa Engineering. Jurnal Ilmiah. https://dx.doi.org/10.56127/juit.v1i3.312
Saputra, R. (2020). Analisa proses produksi jig untuk perakitan pintu depan mobil X. Presisi Jurnal Teknik Mesin, 39. https://jounal.istn.ac.id/indexphp/presisi/article/view/675
Talakua, C. (2022). Desain jig untuk pembuatan frame sepeda motor pada Bengkel Politeknik Negeri Ambon. Jurnal Pengabdian Masyarakat Iron https://doi.org/10.31959/jpmi.v5i1.1428
Tjiptady, B. C., & R. Z. (2021). Jig and fixture redesign for making reamer on head cylinder. Jurnal Pendidikan Teknik Mesin Undiksha, 33. https://doi.org/10.23887/jptm.v9i1.32597
Tjiptady, B. C., Rohman, M., Sudjimat, D. A., & Ratnawati, D. (2020). Analisis tegangan, deformasi, dan retak pada gas turbine blade dengan metode elemen hingga. Jurnal Taman Vokasi, 8(2). https://doi.org/10.30738/jtv.v8i2.8425
Trianggana, D. A. (2018). Peramalan jumlah siswa-siswi melalui pendekatan metode regresi linier. Jurnal Media Infotama, 16(2), 115–120. https://doi.org/10.37676/jmi.v16i2.1149
Widodo, A. Perancangan jig untuk produksi bracket di PT Pro Mechanic Indonesia. Jurnal Inkofar, 105. https://doi.org/10.46846/jurnalinkofar.v8i1
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Authors and Publisher
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
