OPTIMALISASI DESAIN GROOVE UNTUK MENINGKATKAN KINERJA BUSHING PADA RODA BOGIE BERBASIS SIMULASI CFD
DOI:
https://doi.org/10.5281/zenodo.14011093Keywords:
Bushing, Computational Fluid Dynamic, GrooveAbstract
Optimization is a process of maximizing an object to find the best results from a set of alternative solutions that exist, so as to increase its effectiveness, such as profits, minimize process time and so on. This thesis aims to conduct CFD (Computational Fluid Dynamics) simulation analysis on bushings with different grooves in an effort to improve lubrication efficiency. This research uses CFD (Computational Fluid Dynamics) simulation analysis on bushings with different grooves in an effort to improve lubrication efficiency. This research uses CFD (Computational Fluid Dynamics) simulation where a method is used to model, analyze, and related phenomena in the system using a numerical approach. The addition of grooves or grooves on the bushing surface can affect the flow of lubricant around it. Through CFD simulation, the author will compare the performance of various groove designs to identify models that provide better lubrication. The results of this research are expected to provide valuable insights in the development of more lubrication-efficient bushings.
Downloads
References
[1] Kms M Amin Khaitami, Fatahul Arifinand Ella Sundari, “Desain Alat Bantu Troli Penggulung Selang Pemadam Kebakaran Semi Otomatis”, Machinery:Jurnal Teknologi Terapan, vol. 3, no. 1, pp. 29–36, Feb. 2022, doi: https://doi.org/10.5281/zenodo.6413354.
[2] Sumantri, Rita F. "Kompetensi Pengelolaan Pembelajaran, Kecerdasan Interpersonal, Komitmen, Dan Kepuasan Kerja Guru SMK." Jurnal Ilmu Pendidikan Universitas Negeri Malang, vol. 18, no. 1, 2012, doi: https://doi.org/10.17977/jip.v18i1.3380.
[3] Nggi, Y. K. , Rerung, O. D. , & Nasarudin, “Perancangan Bushing Pengganti Bearing Pada Pompa Bahan Bakar Mesin Mtu 12v2000g62 Di PLTD Semau”, Jurnal Teknik Mesin, Vol. 3 No. 2, Halaman: 12 - 15 Oct, 2020. https://www.jurnal.pnk.ac.id/index.php/JTM/article/view/739
[4] Aliyus, K, “Proses Pembuatan Bushing Frame Two Wheel Bogie Bwe Di PT Bukit Asam Tbk”, 2021.
[5] Kriswanto, R. A., & Naryanto, R. F. N. “Optimasi Desain Permanent Magnetic Bearing Untuk Aplikasi Turbin Angin Daya 10 KW”. Jurnal Ilmiah Tekno Sains, vol. 1, no. 1. Nov. 2015 https://doi.org/10.26877/jitek.v1i1/November.834
[6] Widhiada, I. W., “Mechanical Engineering Drawing And Design Dengan Menggunakan Software Autodesk Inventor Versi 2014 Dan 2017”. Engineering Dept. Udayana, Bali, 2017.
[7] A. R. Z. Abdillah, I. . Malik, and S. Effendi, “Perancangan Berbasis Cad-Cae Pada Propeller Tiga Daun Untuk Perahu Kecil”, MACHINERY Jurnal Teknologi Terapan, vol. 3, no. 1, pp. 1–8, Feb. 2022. https://doi.org/10.5281/zenodo.6413283
[8] Wang, M.-W., Arifin, F., & Huynh, T. T.-N. “Optimization of Molding Parameters for a Micro Gear with Taguchi Method”. J. Phys.: Conf. Ser. 1167 012001. Pp. 1-6, 2019. DOI: https://doi.org/10.1088/1742-6596/1167/1/012001
[9] Hardiputra, F., Djafar, A., & Sulistijono. “Perancangan As Roda Troli Pemanjat Tangga Berdasarkan Analisis Tegangan Dan Faktor Keamanan”. SNITT- Politeknik Negeri Balikpapan, vol. 3, pp. 312–316, 2018.
[10] Putra Maulana, A., & Arifin, F. (2023). “CFD analysis in investigating the impact of turbine blade number on the performance of hydro turbine”. Jurnal Polimesin, vol. 21, no.3, Jun. 2023. DOI: http://dx.doi.org/10.30811/jpl.v21i3.3671
[11] A. Garmana, F. Arifin and Rusdianasari, "CFD Analysis for Combination Savonius and Darrieus Turbine with Differences in the Number of Savonius Turbine Blades," 2021 International Conference on Artificial Intelligence and Mechatronics Systems (AIMS), Bandung, Indonesia, 2021, pp. 1-5, doi: https://doi.org/10.1109/AIMS52415.2021.9466009.
[12] Maulana, S. “Pemanfaatan Computational Fluid Dynamics (Cfd) Dalam Strategi Penelitian Simulasi Model Pada Teknologi Penghawaan Ruang”. Jurnal Education Building, vol. 2, no. 2, pp. 10–13. Dec. 2016 https://doi.org/10.24114/eb.v2i2.4393
[13] Mulyadi, “Buku Ajar CAD/CAM (Computer Aided Design / Computer Aided Manufacturing)”, umsidapress, pp. 1-145, Aug. 2021.
[14] Lyons, W., Plisga, G., & Lorenz, M.”Standard Handbook of Petroleum and Natural Gas Engineering (3rd ed.)”. Gulf Professional Publishing. 2015
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
