UNJUK KERJA DESAIN PROTOTYPE ALAT PENEPAT LAS DAN BOR BERDASARKAN ANALISIS ERGONOMI DENGAN METODE QUICK EXPOSURE CHECKLIST

Article Sidebar

Published: Jun 30, 2024
Keywords:
Ergonomics, Prototype, Anthropometry, Quick Exposure Checklist

Main Article Content

Piyata Wira Yonatan Sitohang
Politeknik Negeri Sriwijaya
Irawan Malik
Politeknik Negeri Sriwijaya
Sairul Effendi
Politeknik Negeri Sriwijaya

Abstract

This study aims to develop a prototype design for an ergonomic welding and drilling clamping tool and evaluate its performance by analyzing relevant ergonomic aspects using the Quick Exposure Checklist method. The data utilized encompasses primary data obtained through observations, literature reviews, questionnaires, and field studies. The findings of this research indicate that the resulting prototype design for the welding and drilling clamping tool exhibits a good level of ergonomics, with the ergonomic evaluation test results reaching 37%. This value is slightly below the recommended action limit of 40%, indicating that the tool meets the safe ergonomic criteria based on the Quick Exposure Checklist method.

Downloads

Download data is not yet available.

Article Details

How to Cite
Sitohang, P. W. Y., Irawan Malik, & Sairul Effendi. (2024). UNJUK KERJA DESAIN PROTOTYPE ALAT PENEPAT LAS DAN BOR BERDASARKAN ANALISIS ERGONOMI DENGAN METODE QUICK EXPOSURE CHECKLIST. MACHINERY: Jurnal Teknologi Terapan, 5(2), 108–117. Retrieved from https://jurnal.polsri.ac.id/index.php/machinery/article/view/8244
Issue
Vol. 5 No. 2 (2024): Machinery: Jurnal Teknologi Terapan
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

References

Siswanto, S. R. (2018). Buku Ajar Teknologi Pengelasan, Banjarmasin: Program Studi Teknik Mesin Fakultas Teknik. Universitas Lambung Mangkurat. Lampung.

Abdurrahman. (2023). Penerapan Metode design For Manufacturing padar ancang Bangun Cnc milling 3 Sumbu. Politeknik Negeri Sriwijaya. Machinery Jurnal Teknologi Terapan. Palembang. https://doi.org/10.5281/zenodo.8049149.

Kuswana, S.K. (2014). Ergonomi dan K3. Bandung: PT. Remaja Rosda Karya. http://dx.doi.org/10.31000/jim.v6i2.5007.

Sutrisno, Suprapto dan Wibowo Budi. (2020). Perancangan Meja Sebagai Alat Bantu Proses Pengelasan Berdasarkan Prinsip Ergonomi. Bengkel Praktik Las Dan Kerja Bangku SMK Veteran 1. Jurnal Aplikasi Ilmu Teknik Industri Volume 1, Nomor 1. Sukoharjo. https://doi.org/10.32585/japti.v1i1.625.

Komarudin dan Towip. (2022). Perancangan Meja Las Yang Ergonomis Berdasarkan Analisis Reba. Universitas Sebelas Maret. Jurnal Ilmiah Pendidikan Teknik Kejuruan. Surakarta. https://doi.org/10.20961/jiptek.v15i1.60068.

Ramdhani dan M. Noor, Adam Ridwan. (2018). Analisis Ergonomi Menggunakan Metode Quick Exposure Checklist Pada Praktikan Bidang Keahlian Chassis Otomotif. Universitas Pendidikan Indonesia. Journal of Mechanical Engineering Education, Vol. 5, No. 1. Bandung. https://doi.org/10.17509/jmee.v5i1.12624.

Ilman Ahmad, Yuniar dan Helianty Yanty. (2013). Rancangan Perbaikan Sistem Kerja dengan Metode Quick Exposure Check (QEC). Bengkel Sepatu X Cibaduyut. Jurnal Online Institut Teknologi Nasional No. 2 | Vol. 1. Bandung. https://ejurnal.itenas.ac.id/index.php/rekaintegra/article/view/196.

Aprianto, Teguh. (2022). Perancangan Meja Pengelasan Ergonomis. Sekolah Tinggi Teknologi Bandung. Jurnal Ilmiah Nasional Bidang Ilmu Teknik Vol. 10 No. 01. Bandung. https://doi.org/10.53580/sistemik.v10i1.65.

Sutalaksana, I. Z. (1979), Teknik dan Tata Cara Kerja, Departemen Teknik Industri-ITB. Bandung. https://doi.org/10.31315/opsi.v12i1.2939.

Nurmianto, E. (1996). Ergonomi Konsep Dasar dan Aplikasinya.Institut Teknologi Sepuluh November. Surabaya. https://doi.org/10.9744/interior.1.1.pp.61-73.

Sugiyono, M. P. P., & Kuantitatif, P. (2009). Kualitatif, dan R&D, Bandung: Alfabeta. Cet. Vii.

Wignjosoebroto, S. (2000). Ergonomi Studi Gerak dan Waktu: Teknik Analisis untuk Peningkatan Produktivitas Kerja. Surabaya: Guna Widya, 117-169. https://doi.org/10.14710/jkm.v5i5.18925.

Li, G. dan Buckle, P. (1998). A Practical Method For The Assesment Of Work-Related Musculoskeletal Risks – Quick Exposure Check (QEC). In: Proceedings Of The Human Factors and Ergonomics Society 42nd Annual Meeting, October 5-9. Chicago. https://doi.org/10.1177/154193129804201905.