ANALISIS TERMAL SOKET LAMPU MOBIL KOMPOSIT EPOXY SERAT NANAS DENGAN PENDEKATAN METODE FEA
DOI:
https://doi.org/10.5281/zenodo.10728590Keywords:
Composite, Epoxy Resin, Light Socket, Solidworks, ThermalAbstract
The function of the car light socket is to connect electricity to the car lights. The car lights would result in high temperatures and melt if it is used continuously. The electrical short circuits and light sockets made from plastic can also cause melting. This research aims to find a new material for lamp sockets that has high-insulating characteristics. The researcher uses composite materials of epoxy resin and pineapple leaf fiber to make car light sockets. The thermal simulation uses Solidworks software and its parameters obtained from research journals. The maximum and minimum temperatures that resulted from the thermal simulation are 110.916 ℃ and 74.849 ℃. The melting temperature of the car light socket in the thermal simulation (pineapple fiber-epoxy resin) is higher than the previous light socket material (plastic) and the temperature when a short circuit occurs. Therefore, the pineapple leaf fiber-epoxy resin composite can be used as for car light sockets.
Downloads
References
Aloysius Uran, M. G., & Kurniawan, A. (2023). Analisa Uji Tarik dan Uji Impact Serat Daun Nanas Dan Resin Epoxy Pada Material Komposit. JMMME, 7(1), 1–6.
car-show. (2023, December 16). Car-show Automotive Products Co. Ltd.,. https://www.car-show.com.tw/exec/product.php?mod=list&cid=18&lg=E
garasi.id. (2021, February 2). Penyebab dan Solusi Bohlam Mobil Putus - Garasi.id. Ttps://Garasi.Id/Artikel. https://garasi.id/artikel/5-penyebab-bohlam-mobil-sering-putus-dan-solusi-mengatasinya/59ae2559e7ed0a039e0f7f91
Gopinath, N., Ezhilarasi, D., Kiruthika, S., & Hemavathi, S. (2021). Self-Activating Street Lights Using Sensors and Arduino. 2021 4th International Conference on Computing and Communications Technologies (ICCCT), 469–472. https://doi.org/10.1109/ICCCT53315.2021.9711871
Liu, Y., Jiang, Z., Wang, F., & Chi, N. (2018). 315Mbps Internet of Vehicle Communication System Using Car Head Lamp Based on Weighted Pre-distortion. IEEE 18th International Conference on Communication Technology (ICCT), 509–512.
Oktavia, O., Lestari, D., Rokar, R. K., & Kurniawan, W. B. (2023). Particle Board Heat Insulation Pineapple Leaf Fiber Waste and HVS Paper as An Alternative To Improve Indoor Environmental Quality. Jambura Physics Journal, 5(1), 49–56. https://doi.org/10.34312/jpj.v5i1.18778
Saputra, E. B., Fachriza, A., Prabowo, B., & Hartono, B. (2023). Analysis of Thermal Conductivity Of Epoxy Composites With Fillers Pineapple Fiber and Na2sio3 as Car Light Socket Material. Rotor, 16(2), 36–41. https://doi.org/https://doi.org/10.19184/rotor.v16i2.37395
Suyoko, Y., & Mubtadi, B. I. (2020). Ketangguhan Retak Komposit Epoxy-Serbuk Cangkang Kerang. Politeknosains, 19, 27–32.
Tambunan, J. M. (2017). Studi Rancang Bangun dan Temperatur Zona Continuous Furnace Sintering Material Frangible Cu-5wt%Sn [TUGAS AKHIR]. Institut Teknologi Sepuluh November.
Tauvana, A. I., Syafrizal, & Subekti, M. I. (2020). Pengaruh Matrik Resin-Epoxy Terhadap Kekuatan Impak Dan Sifat Fisis Komposit Serat Nanas. Jurnal Polimesin, 18(2), 99–104.
Zhu, Y., Guo, L., Lee, Y., Xu, X., Xie, J., Zhang, G., & Hu, Y. (2019). 57.4: OLED in Automotive Lighting Applications. SID Symposium Digest of Technical Papers, 50(S1), 628–631. https://doi.org/10.1002/sdtp.13592
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
