PENINGKATAN KUALITAS REAR DERAILLEUR HANGER PADA SEPEDA MULTI GEAR MELALUI PENAMBAHAN UNSUR MAGNESIUM

Authors

  • Rama Wijaya Rama Mahasiswa Program Studi Teknik Mesin Produksi dan Perawatan, Politeknik Negeri Sriwijaya
  • Firdaus Jurusan Teknik Mesin, Politeknik Negeri Sriwijaya
  • Taufikurahman Jurusan Teknik Mesin, Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.5281/zenodo.10725225

Keywords:

Aluminium, Magnesium, Rear derailleur hanger, Squeeze Casting, Impact test

Abstract

Rear derailleur is one of the components on a bicycle that functions to replace or change gears/speed by moving the bicycle chain from one wheel to another. In use, the rear derailleur requires an additional component to connect the rear derailleur to the bicycle frame, namely the rear derailleur hanger. Where the rear derailleur hanger is made of aluminum. In its application, the rear derailleur hanger often experiences damage caused by shock loading and breaks due to the collisions that occur. With the squzee casting method, the smelted material is put into the mold cavity which is then pressed using a hydraulic tool when the material is almost frozen with variations in the addition of the percentage of elemental magnesium by 2%, 4% and 5% with a pressure statement of 70 MPa and the melting temperature reaches a point of 660ÌŠ C. In the results obtained the average value of the Impact price is at a composition of 2% magnesium by 0.0357 J/mm2, at a composition of 4% by 0.0951 J /mm2, and 6% composition of 0.0594 J/mm2, it can be observed that the highest addition was produced at a percentage addition of 4% and decreased in value at a percentage of 6%. From the results of the study showed an increase in the value of the value of the raw material that is equal to 0.0178 J/mm2.

 

Downloads

Download data is not yet available.

References

Alian, & Ibrahim. (2013). Kajian Eksperimental Pengaruh Paduan Timah Aki ( 10 %, 15 %, 20 %, 25 %) Pada Coran Tembaga Pipa Ac ( Air Conditioner ) Bekas Terhadap Sifat Mekanik. 13(1), 35–53. https://ejournal.unsri.ac.id/index.php/jrm/article/view/74

Cholis, Suharno, & Yadiono. (2013). Pengaruh Penambahan Unsur Magnesium (Mg) Terhadap Kekerasan dan Struktur Mikro pada Pengecoran Aluminium. 3(1), 1–7. https://jurnal.fkip.uns.ac.id/index.php/ptm/article/download/2659/1859

Dhanashekar & Kumar. (2014). Squeeze casting of aluminium metal matrix composites - An overview. Procedia Engineering, 97(January 2015), 412–420. https://doi.org/10.1016/j.proeng.2014.12.265

Iqbal, Sukmana, & Burhanuddin. (2018). Studi Sifat Mekanik Magnesium AZ31 Hasil Proses Pengecoran Tekan ( Squeeze Casting ). 11(1), 1–5. https://doi.org/10.24843/JEM.2018.v11.i01.p01

Kasim, Hermansyah, & Norhafani. (2019). Perancangan Aplikasi Perhitungan Peleburan Logam Dengan Tanur Kupola. Print) Jurnal INTEKNA, 19(1), 1–68. http://ejurnal.poliban.ac.id/index.php/intekna/issue/archive

putra dan mulyanto. (2017). Analisis Sifat Mekanis Material Cylinder Block Motor Yamaha Mio J Dengan Penambahan Unsur Silikon (Si) Analysis Of Mechanical Behavior Of Cylinder Block Material In Yamaha Mio J Motorcycle With Additional Elements Silicon (Si). Jurnal Teknologi Rekayasa, 22(3), 152–169. https://ejournal.gunadarma.ac.id/index.php/tekno/article/view/1765/1524

Rusnoto. (2013). Studi Kekuatan Impak Pada Pengecoran Paduan Al-Si (Pistonbekas) Dengan Penambahan Unsur Mg. Jurnal Foundry, 3(2), 24–28. https://ejournal.polmanceper.ac.id/index.php/Foundry/article/view/41

Saefuloh, Pramono, Jamaludin, Rosyadi, & Haryadi. (2018). Studi Karakterisasi Sifat Mekanik Dan struktur Mikro Material Piston Studi Karakterisasi Sifat Mekanik Dan struktur Mikro Material Piston Alumunium-Silikon Alloy. September 2019. https://doi.org/10.36055/fwl.v2i1.4010

Saputra. (2014). Pembuatan dan pengujian dapur busur listrik skala laboratorium dengan kapasitas tungku peleburan maksimal 200 gram ( Fabrication oflaboratory scale of electric arc furnace with melting. http://repository.umy.ac.id/handle/123456789/4542

Zain, Junaidi, & Nasution. (2022). Pengaruh Penambahan Unsur Silikon ( Si ) Pada Aluminium ( Ai ) Terhadap Kekuatan Impak Material Campuran Al-Si. 17(3), 3–6. https://jurnal.uisu.ac.id/index.php/but/article/view/5368

Downloads

Published

2024-02-29

How to Cite

Rama, R. W., Firdaus, & Taufikurahman. (2024). PENINGKATAN KUALITAS REAR DERAILLEUR HANGER PADA SEPEDA MULTI GEAR MELALUI PENAMBAHAN UNSUR MAGNESIUM. MACHINERY Jurnal Teknologi Terapan, 5(1), 1–7. https://doi.org/10.5281/zenodo.10725225

Issue

Vol. 5 No. 1 (2024): Machinery: Jurnal Teknologi Terapan

Section

Articles

License

Copyright (c) 2024 Authors and Publisher

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.