ANALISA VARIASI KECEPATAN PUTARAN PISAU TERHADAP KINERJA MESIN PERAJANG DAN HASIL IRISAN KERIPIK
DOI:
https://doi.org/10.5281/zenodo.10728279Keywords:
Chips slicing machine, Rotation speed, Slice resultsAbstract
The development of today's technology encourages the innovation of Technological developments encourage innovation in slicing chips that are done manually, now developing using machines. The quality of the chips is determined by the taste, crispness, color and shape of the slices. This research aims to test and determine the best knife rotation speed on a chips chopper machine.The rotational speed of the knife is one of the determining factors for producing sliced chips that are in accordance with the wishes of consumers. This test will be carried out by adjusting the blade rotation speed using a dimmer, then slicing the chips according to the treatment. The treatment combination of blade rotation speed was 1303 rpm, 1355 rpm and 1375 rpm and the materials used were cassava, potatoes and bananas. Research data will be analyzed using quantitative methods. Based on research conducted that the highest effective capacity of the machine is at a blade rotation speed of 1375 rpm with cassava material of 26.74 kg/hour, the best yield of enumeration at a blade rotation speed of 1375 rpm with cassava material is 90%. The best percentage of intact slices was found at a blade rotation speed of 1303 rpm with potato material, namely 34%, half whole slices at a blade rotation speed of 1355 rpm with cassava material, namely 30%, and crushed slices at a knife rotation speed of 1375 with cassava material, namely 42%.
Downloads
References
Apriyani, D. F. (2022). Analisis Kinerja Mesin Pengiris Tipe Vertikal dengan Jenis Bahan dan Kecepatan Putaran Terhadap Hasil Irisan Keripik [Skripsi Tidak Dipublikasikan]. Universitas Sriwijaya.
Arriyani, Y. F., Idiar, Subkhan, & Krishnaningsih, S. D. (2021). Unjuk Kerja Mesin Pencacah Pelepah Kelapa Sawit dengan Sistem Rotary. Jurnal IlmiahTeknik Mesin,15(2), 130-135. https://doi.10.24853/sintek.15.2
Damanik, I. D., Paldy, M. R., Purba, R., & Sebayang, S. (2022). Rancang Bangun Mesin Pengiris Keripik Pisang Kapasitas 60 kg/jam dengan Menggunakan Motor Bakar. Jurnal Teknologi Mesin UDA, 3(2), 107-116. https://jurnal.darmaagung.ac.id/index.php/teknologimesin/article/view/2605
Dharmawan, A., Alamsyah, R. A., Tasliman, & Soekarno, S. (2022). Rancang Bangun dan Uji Kinerja Mesin Perajang keripik Pisang dengan Empat Pisau Horizontal. Jurnal Teknotan, 16(2), 79-84. https://doi.10.24198/jt.vol16n2.3
Ferdiansyah, M., Ardianto, F., & Yuniarti, E. (2021). Pemanfaatan Motor Universal Sebagai Tenaga Penggerak Mesin Peniris Minyak dengan Pengatur Kecepatan. Jurnal Surya Energy, 5(2), 43-49. https://doi.org/10.32502/jse.v5i2.3244
Frasdianata, R. A., Azharuddin, A., & Effendi, S. (2023). Analisa Pengaruh kecepatan Putaran Pada Mesin Pengaduk Bahan Untuk Pupuk Organik dan Media Tanam Terhadap waktu dan Hasil Putaran (Di KOREM 044/GAPO, Desa Rambutan kabupaten Banyuasin). https://doi.org/10.5281/zenodo.10122250
Herlan, & Prabowo, B. A. (2009). Rangkaian Dimmer Pengatur Iluminasi Lampu Pijar Berbasis Internally Triggered TRIAC. Jurnal INKOM, 14 - 21.
Idkhan, A. M. (2017). Analisis Penerapan Mesin Pengiris Umbi untuk Olahan Keripik di Makassar. Jurnal Teknologi, 16(1), 12-17.
Nurdiansyah, M., Saparin, Setiawan, Y., & Wijanti, E. S. (2023). Rancang Bangun Mesin Pencacah Sampah Organik. Machinery Jurnal Teknologi Terapan, 4(2), 60-66. https://doi.org/10.5281/zenodo.8048925
Porawati, H., Darmuji, & Rifai, A. I. (2020). Uji Kinerja Mesin Pencacah Tumbuhan Nilam dengan Kapasitas 120 kg/jam. Jurnal Media Komunikasi Rekayasa proses dan Teknologi Tepat Guna, 16(2), 68-74.
Prawira, T. (2020). Uji Kinerja Alat Pengiris Keripik Mekanis pada Komoditas Kentang [Skripsi, Universitas Sumatera.Utara]..Repository.Institusi.Universitas.Sumatera.Utara..https://repositori.usu.ac.id/handle/12/3456789/25757
Rusdi, M., Susanto, T. A., & Dullah, M. J. (2022). Rancang Bangun Mesin Pengiris Pisang untuk Pembuatan Keripik Pisang Terintegrasi dengan Penggorengan. Prosiding 6 th Seminar nasional Penelitian dan Pengabdian Masyarakat, 169-174.
Santosa, Mislaini R, & Putra, R. (2015). Rancang Bangun Alat Pencacah dan Pemarut Sagu dengan Sumber Penggerak Motor Listrik. Prosiding Seminar Agroindustri dan Lokakarya Nasional FKPT-TPI Program Studi TIP-UTM, 13-32.
Saputro, Y., Saksono, D. Y., Kurniawan, A. D., & Yusuf, M. (2021). Pengembangan Desain Alat Pemotong Keripik Singkong dalam Peningkatan Hasil Produksi Keripik. Jurnal Surya Teknika, 8(1), 35-38. http://ejournal.politeknikmuhpkl.ac.id/index.php/suryateknika
Yanto, H. (2022). Uji Kinerja Modifikasi Masin Pengiris dengan Sumber Energi Listrik DC untuk Bahan Baku Pisang Kepok (Musa Paradisiaca Forma) [Skripsi Tidak Dipublikasikan]. Universitas Sriwijaya.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
