RANCANG BANGUN CETAKAN SEAL APAR DIAMETER 32.60MM
DOI:
https://doi.org/10.5281/zenodo.7684065Keywords:
Compression Molding, Fire Extinguisher Seal Mold, ShrinkageAbstract
This study aims to make a rubber-based fire seal with a diameter of 32.60 mm using a Compression Molding tool. Compression Molding itself is a set of printing tools by heating and pressing. The scheme of the basic processes consists of heating a charge (thermostat and reinforcement) to a certain temperature, in the mold cavity and then pressing it with a certain pressure.The first process begins with tool preparation and mold making, then rubber is made into a 32.60mm diameter fire seal. After everything has been prepared, then cut the rubber into small pieces to meet the volume of the seal in the mold and put the rubber into the mold. Press the mold using a  re using the thermostat. After completion, the measurement of seal shrinkage includes the inside diameter, outside diameter, and seal thickness and then compared with the mold size, so that conclusions can be drawn. The calculation is influenced by the density of the structure after the testing process.
Downloads
References
Fatahul Arifin, Fenoria Putri, Iskandar, Mulyadi, Suparjo, Franando dan Yusuf Dewantoro Herlambang (2020). Optimization of Stroke Rehabilititation Hand Component of 3D Printing With Taguchi Method Approach. Atlantis Highlight in Engineering, 1-6.
Fatahul Arifin, Dwi Arnoldi, Ella Sundari, Fenoria Putri, Feby Agasa, Yudha Ramadhan, Gustaf Susetyo dan Yusuf Dewantoro Herlambang (2020). Studi Analisis Simulasi Kekuatan Beban pada Alat Bantu Pembuatan Lubang dengan Sudut Kemiringan 45 Derajat. Jurnal Polimesin, 1-8.
Lindriati, T dan Hari Arbiantara (2010). Pengembangan Proses Compression Molding dalma pembuatan Edible Film dari tepung koro pedang. J. Teknol dan Industri Pangan, 53-54
Muhammad Al Haramain dan Riki Effendi (2017). Perancangan Silinder Hidrolik Pada Mesin Molding Karet Dengan Kapasitas 25 Ton. Jurnal Mesin Teknologin, 1-7.
Wirda Novarika, Fatahul Arifin, Eka Satria Martomi, Indra Gunawan dan Fathur Raihan Perdana (2021). Design Manufacture Of Fixture Fire Fighter Kit. Internasional Journal of Research in Vocational Studies (IJRVOCAS), 1-9.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
