ANALISA PENGARUH TEMPERATURE DAN SUDUT SCREW TERHADAP WAKTU EKSTRUSI PADA MESIN EKSTRUSI SINGLE SCREW DARI BAHAN RECYCLE HIGH DENSITY POLYETHYLENE (HDPE)
DOI:
https://doi.org/10.5281/zenodo.6857516Keywords:
Extrusion Machine, Temperature, Screw Angle, ANOVA, Speed.Abstract
This research goal is to determine the effect of temperature and screw angle to extrusion speed with High Density Polyethylene as Material on Single Screw Extrusion Machine. On this research use 2 factor, first Temperature with 160°C, 170°C, and 180°C. and the second one is Screw Angle with 0°, 15°, 25°. The roller and puller are setted up to 16 Rpm, data from the research analyze with ANOVA method. And results from the data researcher got the fastest on Screw Angle 25° with 170°C Temperature. And the slowest on Screw Angle 0° with 160°C Temperature. The conclusion that researcher got is Temperature doesn’t effect on extrusion speed because it doesn’t significant, Whereas the Screw Angle have an effect on extrusion speed.
Â
Keywords : Extrusion Machine, Temperature, Screw Angle, ANOVA, Speed.
Downloads
References
Banjaransari, Anurogo, dkk. 2020. Perancangan Mesin Penggulung Filamen Pla Diameter 1.75 Mm Dari Hasil Ekstrusi Plastik, Industrial and Mechanical Design Conference Vol 2 Politeknik ATMI Surakarta.
Hamod, Haruna. Suitability of recycled HDPE for 3D Printing Filament. Arcada University of applied science.
Imanda, Jordhy, 2015. Pengaruh Sudut Ulir dan Komoditas Terhadap Kinerja Alat Screw Conveyor Pada Dua Variasi Kecepatan Putar. Jurnal Teknik Pertanian Lampung Vol. 4, No. 3, hh. 209-218.
Irawan, D & Mekar Bisono, R.2018.Rancang Bangun Prototype Mesin Ekstrusi Polimer Single Screw. Seminar Nasional Multidisiplin. 29 September 2018, Jombang, Indonesia.
Mujiarto, I. 2012. Sifat Dan Karakteristik Material Plastik Dan Bahan Aditif. Jurnal Traksi Vol. 3. No. 2.
Wibisono, Chandra Andreas Setyo. Dkk. 2020. Penerapan PID Kontrol Untuk Pengendalian Kecepatan Motor DC Stepper Pada Pemposisi Hasil Cetak Filament (3D Printing) Di Gulungan Berbahan Daur Ulang. Jurnal Elkolind Vol. 7 , No.1.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
