DESAIN ALAT PENEPAT PENGELASAN KIT PEMADAM KEBAKARAN
DOI:
https://doi.org/10.53893/austenit.v14i1.4397Keywords:
fire, jig and fixture, welding, kit, extinguisherAbstract
Fire is a disaster that no one wants. Fires can occur anytime and anywhere, one of which is offices, buildings, warehouses, and even forests. Fires in buildings can cause losses in both material and non-material properties. To extinguish the fire, you need supporting equipment, for example a Fire Extinguisher Kit (FEK), which is a fire hose reel. To produce this tool, a production aid is needed in terms of gripping the workpiece that will be used as a fire fighting kit product. Fire Hose Reel production aids are production workpiece holder tools that are used in order to make accurate doubling of components to get good work results in production, of course there should be compatibility in terms of the position of the workpiece with the machine used. The fixing device is used which is designed to position, hold, and support each part so every welding performed is within the specified limits. In the process of designing and manufacturing, this Welding Tool for Production of FEK uses software to calculate the load that these production aids can withstand and for the manufacturing process tools such as cutting grinders, drilling machines and other bench work tools are used. This tool can withstand the weight of objects up to 50 kg. with a deflection of 0.055 mm.
Downloads
References
A Garmana, F Arifin, Rusdianasari, 2021, CFD Analysis for Combination Darrieus and Savonius Turbine with Differences in the Number of Savonius Turbine Blades, Proceeding International Conference on Artificial Intelligence and Mechatronics Systems (AIMS), Bandung, 2021.
E. Hady, “Jig and Fixture†https:// www.kompasiana.com/1991/55008c1aa3331130725112d6/jig-dan-fixture, (diakses 10 Oktober 2021).
F Arifin., D Arnoldi., E. Sundari, F Putri., F Agasa., Y Ramadhan., G.Susetyo, , Y. D, Herlambang 2020, Study of strength analysis simulation of Jig and Fixture 45 degree bore, Jurnal Polimesin. Vol. 18, No. 2, DOI: http://dx.doi.org/10.30811/jpl.v18i2.1837.
H Candra, D. P Putra, Romli, 2021, Investigasi Tegangan Pada Poros Bertingkat Menggunakan Metode Elemen Hingga Berbasis Computer Aided Engineering, Jurnal Austenit, Vol.13, No. 1, DOI: https://doi.org/10.5281/zenodo.4747728.
Sularso , 2004, “Dasar Perencanaan dan Pemilihan Elemen Mesinâ€, Cetakan 11, Pradya Paramita, Jakarta.
M Kamal, F Arifin, Rusdianasari, 2021 Analysis of the Performance of The Four-Blade Darrieus Wind Turbine at the Jamik Bukit Asam Mosque Complex Tanjung Enim South Sumatra, International Journal of Research in Vocational Studies (IJRVOCAS), Print ISSN 2777-0168, Online ISSN 2777-0141, DOI: https://doi.org/10.53893/ijrvocas.v1i2.52
K Venkatarama, 2015, “Design of Jigs, Fixtures and Press Toolsâ€, John Wiley & Sons Ltd, West Sussex, United Kingdom
M. W Wang., F. Arifin, H. L. Ku., 2019, Study on micro moulding of a high viewing angle LED lens. Plastics, Rubber and Composites, DOI: 10.1080/14658011.2019.1685803
M. W Wang., F. Arifin, J. Y. Huang, 2019 “Optimization of The Micro Molding of A Biconcave Structure, International Journal of Technology†10(2): 269-279.
M. W. Wang, C. H. Chen, F. Arifin, and J.J Lin, 2018, Modeling and analysis of multi-shot injection molding of Blu-ray objective lens, Journal of Mechanical Science and Technology vol. 32 ed.10 hal. 4839~4849, DOI 10.1007/s12206-018-0932-z]
O. Irawan, Y. Bow, R.D Kusumanto, 2021, Simulation and Performance Test Giromill Type Wind Turbine; Case Study Muara Enim, South Sumatra, Indonesia, International Journal of Research in Vocational Studies (IJRVOCAS), Print ISSN 2777-0168, Online ISSN 2777-0141, DOI: DOI: https://doi.org/10.53893/ijrvocas.v1i2.10
R.M. Fauzi, F. Arifin, RD. Kusumanto, Optimization of Vertical Wind Turbine Performance in Tunnel Area of Coal Conveyor, Proceeding The 7th International Conference on Electrical, Electronics and Information Engineering (ICEEIE 2021), Malang, 2021
….., Kerugian Kebakaran Hutan dan Lahan Sepanjang 2019 Capai Rp 75 Triliun, https://bnpb.go.id/berita/kerugian-kebakaran-hutan-dan-lahan-sepanjang-2019-capai-rp-75-triliun, (diakses 10 Oktober 2021)
…., Ranked: The countries with the shortest people in the world, https://www.insider.com/shortest-people-in-world-by-country-2019-6#12-malawi-15831cm-5-feet-232-inches-14 (diakses 26 Oktober 2021)
Tarwaka. 2015. Ergonomi Industri Dasar-Dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja (Cetakan Kedua). Harapan Press. Surakarta.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Authors and Publisher
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.
