PERANCANGAN DAN PENGUJIAN ALAT PENGASIN TELUR BEBEK DENGAN AIR COMPRESSION PRESSURE

Authors

  • Yusup Nur Rohmat Politeknik Negeri Indramayu
  • Kusnandar Hidayat Politeknik Negeri Indramayu
  • Delffika Canra Politeknik Negeri Indramayu
  • Suliono Suliono Politeknik Negeri Indramayu
  • Haryadi Haryadi Universitas Sultan Ageng Tirtayasa
  • Hendar Priyatna Universitas Masoem

Keywords:

Proses Pengasinan, Telor asin, Tekanan udara 4-6 Bar

Abstract

The traditional method of making salted eggs usually using the salting, which is done well, its needs time about 14 days. This condition indicated to have a method that can speed up the process of salting the eggs. The process of salting eggs normally uses the usual soaking method where the eggs are coated with bricks and rubbing ash then left to stand. The diffusion of salt penetration in traditional salting takes place slowly. For this reason, the speed of salt penetration can be done by increasing the salt level in the soaking solution so that the penetration of salt into the eggs can take place faster. This methodology in this research study using of air pressure to speed up the process of salting the eggs. The method used is to use air pressure with the use of compressor air pressure at a pressure of 4 - 6 Bar with a salting test time of about 4 to 7 hours

Downloads

Download data is not yet available.

References

Coordinating Ministry For Economic, R.o.I., Master Plan for Acceleration and Expansion of Indonesia Economic Development (MP3EI) 2011–2025, Coordinating Ministry for Economic Affairs, Republic of Indonesia, Jakarta.

I. Ramli dan N. Wahab. 2020. Teknologi Pembuatan Telor Asin dengan Penerapan Metode Tekanan Osmotik. Iltek. Jurnal Teknologi. Vol. 15, hal. 82-86.

J. Zhang, J. Tan, W. tang, F. Wang, X. Zhao. 2019. Collapse performance of externally pressurized resin egg-shaped shell with corrosion thinning. International Journal of Pressure Vessel and Piping. Vol. 177, 103993.

M. H. Pulungan, S. Pandunusawan, A. Lastriyanto. 2019. Rancang bangun alat Pengasin Telor Puyuh (Coturnix coturnix) Berbasis Dehidrasi Osmosis Bertekanan Statis. Industria: Jurnal Teknologi dan Manajemen Agroindustri. Vol. 8, hal, 19-26.

M. Pekik, R. Ayu. 2018. Perancangan Tangki Stainless Steel untuk Penyimpanan Minyak Kelapa Murni Kapasitas 75 m^3. JTERA - Jurnal Teknologi Rekayasa, Vol. 3 (No. 1), Hal. 39-46.

P. Dony, M. Elfida, A. Yunus. 2018. Penentuan Laju Korosi dan Sisa Umur Pakai (Remaining Service Life/Rsl) pada Jalur Pipa Transportasi Crude Oil dari Spu-A Mundu ke Terminal Balongan di PT Pertamina Eksplorasi dan Produksi Asset 3 Jatibarang, Kabupaten Indramayu Provinsi Jawa Barat. Prosiding Teknik Pertambangan.

Romli, Analisis Sifat Mekanis Pengaruh Proses Pengelasa baja Tahan Karat, Jurnal Austenit. Vol 3, hal 21-34.

Rukmiasih, N. Ulupi, dan W. Indriani. 2015. Sifat Fisik, Kimia dan Organoleptik Telor Asin Melalui Penggaraman dengan Tekanan dan Konsentrasi Garam yang Berbeda. Jurnal Ilmu Produksi dan Teknologi Hasil Peternakan. Vol. 03, hal. 142-145.

Sujinem. 2006. Percepatan penetrasi garam ke dalam telur itik (Anasplatyrhincos) dengan metode tekanan dalam proses pembuatan telur asin. Institut Pertanian Bogor, Program Studi Teknologi Hasil Ternak. Fakultas Peternakan.

SNI,Standar Nasional Indonesia. 2012. Spesifikasi baut baja hasil perlakuan panas dengan kuat tarik minimum 830 Mpa (ASTM A325 M -04,IDT). In SNI ASTM A324:2012. BSN Badan Standardisasi Nasional.

Wulandari Z, Rukmiasih, T Suryati, C Budiman, N Ulupi. 2014. Teknik pengolahan Telur dan daging Unggas. IPB Press. Bogor.

X. Wang, Y. Huang, B. Zhou, W. Xu, X. Xiang, Q. Huang, dan S. Li. 2021. Improvement of quality and flavor of salted egg yolks by ultrasonic assisted cooking. Ultrasonic Sonochemistry. Vol. 75, 105579.

Published

2021-11-25

How to Cite

Rohmat, Y. N. ., Hidayat, K., Canra, D., Suliono, S., Haryadi, H., & Priyatna, H. (2021). PERANCANGAN DAN PENGUJIAN ALAT PENGASIN TELUR BEBEK DENGAN AIR COMPRESSION PRESSURE. AUSTENIT, 13(2), 47–53. Retrieved from https://jurnal.polsri.ac.id/index.php/austenit/article/view/3952

Similar Articles

<< < 3 4 5 6 7 8 9 10 11 12 13 > >> 

You may also start an advanced similarity search for this article.