OPTIMALISASI MESIN BENDING AKRILIK DENGAN VARIASI PENINGKATAN SUHU
-
Keywords:
Acrylic, Bending, Machine, Optimization, Taguchi, TemperatureAbstract
The acrylic bending machine used in this study is a development of a machine that has been circulating in the market and also a development of the previous acrylic bending machine which aims to optimize the acrylic bending tool in order to produce an acrylic bending machine that is more precise in temperature regulation and bending results, this test is carried out by means of experimental data collection or direct testing and data analysis methods used is a Taguchi method with an orthogonic array L16 which is assisted by Minitab software and the results are obtained that the temperature, time and angle settings are quite influential on the bending results in each thickness, and the variation of each combination is not too significant and it can be concluded that the acrylic bending machine in this study can work more optimally because of the stable temperature setting and also good bending results, especially in acrylic 1.5 mm to 3 mm and also this machine can also bend 5 mm thick acrylic but requires a longer heating time
Downloads
References
[1] J. Yanda Zaira, “Penentuan Suhu Optimal Proses Pembentukan Profil pada Mesin Vakum Akrilik,” Jurnal Elementer Vol. 3, No. 2, Nov 2017. doi: http://jurnal.pcr.ac.id
[2] A. Wronka and G. Kowaluk, “Selected bending properties of mineral-acrylic solid surface material for furniture construction purposes,” Forestry and Wood Technology No. 110, 2020: 54-60. doi: https://tuplex.pl
[3] R. Urwatal Wusko, “Rancang Bangun Acrylic Bending Machine Dengan.”2013. doi: https://repository.ub.ac.id/
[4] A. Fauzi, A. Hermiati, A. Wardani, H. As’adi, and N. Husodo, “Mesin Roll Bending Plat Akrilik.” doi: 574-1145-1-SM-libre.pdf (d1wqtxts1xzle7.cloudfront.net)
[5] S. M. Sharun*, N. A. S. M. Asri, and S. H. Y. S. Abdullah, “Low Cost Semi Automatic Ac r ylic Cutter and Bending Machine,” International Journal of Innovative Technology and Exploring Engineering, vol. 9, no. 10, pp. 233–237, Aug. 2020, doi: 10.35940/ijitee.J7469.0891020.
[6] Osada. et. al. ”Bending Streng And Hardbess of Autopolymerized Acrilic Resin” Forestry and Wood Technology No. 110, 2020: 54-60, 2010, doi: Int Chin J Dent 2010; 10: 1-5.
[7] C. Setiawan, H. Khoswanto, H. Saptono, “Pembuatan Bending Machine Akrilik Berbasiskan Kontroler Arduino.” Jurnal Teknik Elektro, Vol. 10, No. 2, Sep 2017, 54-59, doi : 10.9744/jte.10.2.54-59
[8] A. Amin, A. Z. Hudaya, and R. Wibowo, “Evaluasi Unjuk Kerja Mesin Roll Akrilik,” Jurnal Crankshaft, vol. 5, no. 2, 2022, doi: https://doi.org/10.24176/crankshaft.v5i2.8783
[9] M. C. Zulfa et al., Desain Fasilitas Kerja Alat Penekuk Akrilik Menggunakan Metode Macroergonomic Analysis And Design (Mead) Pada Cv. Caesar Advertising. doi: http://dx.doi.org/10.36499/psnst.v1i1.1495
[10] B. Hermanda Commander, “Perancangan Dan Pembuatan Mesin Penekuk Akrilik.” 2017. [Online]. Available: https://dspace.uii.ac.id/handle/123456789/3918
[11] M. Kusumawardani and H. Yasin, “Optimalisasi Parameter Teknik Pengelasan Flux Cored Arc Welding (Fcaw) Menggunakan Metode Taguchi Multirespon Pcr-Topsis,” vol. 4, pp. 573–582, 2015, doi: http://ejournal-s1.undip.ac.id/index.php/gaussian
[12] A. Wijanarta, N. Salam, and D. Anggraini, “Metode Taguchi Untuk Peningkatan Kualitas Mutu Produk,” Jurnal Matematika Murni dan Terapan Epsilon, Vol. 8, No. 1, Jun 2014. doi: https://doi.org/10.20527/epsilon.v8i1.103
[13] A. I. Mayasari, T. Wuryandari, and A. Hoyyi, “Optimalisasi Proses Produksi Yang Melibatkan Beberapa Faktor Dengan Level Yang Berbeda Menggunakan Metode Taguchi,” vol. 3, no. 3, pp. 303–312, 2014, doi: http://ejournal10.1016/j.proeng.2012.06.007-s1.undip.ac.id/index.php/gaussian
[14] R. Ampuh Hadiguna and A. Ramadhianto, “Prosiding Seminar Nasional Teknik Industri (SENASTI).”, “Optimalisasi Parameter Teknik Pengelasan Shielded Metal Arc Welding (SMAW) dengan Menggunakan Metode Taguchi.”, 2023, doi: www.kobelcocm-global.com
[15] B. Setiyana, “Optimalisasi Kekerasan dan Struktur Mikro Baja Karbon Sedang pada Bucket Teeth Excavator Menggunakan Metode Taguchi dan Anova.”, Vol. 19, No. 4: 177−184 , Okt 2017, doi: http://ejournal.undip.ac.id/index.php/rotasi
[16] L. B. Abhang and M. Hameedullah, “Optimization of machining parameters in steel turning operation by Taguchi method,” in Procedia Engineering, Elsevier Ltd, 2012, pp. 40–48. doi: 10.1016/j.proeng.2012.06.007
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
