PENGARUH VARIASI MATERIAL MATA PAHAT ENDMILL TERHADAP KEKASARAN PERMUKAAN RESIN PADA CNC ROUTER 3018
DOI:
https://doi.org/10.5281/zenodo.8049203Keywords:
Kekasaran Permukaan, HSS, Karbida, TungstenAbstract
The purpose of this study is to find out what chisel is the best for cutting acrylic resin and evaluate which one is the best, which can be seen from the surface roughness value obtained through the cutting process. The workpiece materials used in this study are acrylic resins and various types of chisels, namely HSS, carbide and tungsten, Because the chisel has different characteristic properties, so it can be used as a comparison. For the next process, the workpiece is fed three times with a spindle kec of 1000 rpm and a cut kec of 400 mm / minute and a feeding depth of 0.5 mm. It can be concluded that the surface roughness data of the workpiece, the value of the surface roughness of the workpiece of acrylic resin is averaged from the smoothest to the roughest, namely HSS, tungsten chisel, and the roughest carbide. The average roughness value of the HSS chisel is 0.751 μm and the average roughness value of the tungsten chisel is 1.578 μm and the roughness value of the carbide chisel is 1.768 μm.
Downloads
References
Ibrahim, G. A. (2014). Identifikasi Nilai Kekasaran Permukaan pada Pemesinan Paduan Magnesium. Jurnal Mechanical, 5(1), 11-15. Retrieved from http://journal.eng.unila.ac.id/index.php/mech/article/view/224
Izelu, C. O., Eze, S. C., Oreko, B. U., & Edward, B. A. (2014). Effect of Depth of Cut, Cutting Speed and Work-piece Overhang on Induced Vibration and Surface Roughness in the Turning of 41Cr4 Alloy Steel. International Journal of Emerging Technology and Advanced Engineering, 1-5. Retrieved from https://www.researchgate.net/profile/Benjamin-Oreko/publication/319392427_Effect_of_Depth_of_Cut_Cutting_Speed_and_Feed_Rate_on_Induced_Vibration_and_Surface_Roughness_in_the_Turning_of_41Cr4_Alloy_Steel/links/5ae5e3c8a6fdcc3bea9683b3/Effect-of-Depth-of-C
Jonoadji, N., & Dewanto, J. (1999). Pengaruh Parameter Potong dan Geometri Pahat Terhadap Kekasaran Permukaan Pada Proses Bubut. Jurnal Teknik Mesin, 1(1), 82-88. doi:https://doi.org/10.9744/jtm.1.1.pp.%2082-88
Malik, I., Azharuddin, & Riyadi, S. (2020). Pengaruh Spindle Speed, Feed Rate, Dan Depth Of Cut Terhadap Akurasi dari Hasil Permesinan Mesin Cnc Router 3 Sumbu. Austenit, 11(2), 33-40. doi:https://doi.org/10.5281/zenodo.4547801
Nasution, A. R., Affandi, Umurani, K., & Siregar, A. M. (2021). Analisis Kekasaran Permukaan Cast Iron Menggunakan Cairan Pendingin Berbasis Nabati Pada Proses Face milling. Jurnal Rekayasa Material, Manufaktur dan Energi, 4(2), 125-131. doi:https://doi.org/10.30596/rmme.v4i2.8073
Novrialdy, Y., K, A., A, Y., & Prasetya, F. (2021). PENGARUH VARIASI FEED RATE TERHADAP KEKASARAN PERMUKAAN POLYETHYLENE MENGUNAKAN MESIN CNC MIILING. Vomex, 25-33. doi:https://doi.org/10.24036/vomek.v3i2.206
Zaynawi, Wiro, B. K., & Bisono, F. (2018). Proses Kalibrasi Sumbu X, Y, Dan Z Pada Mesin CNC Router Kayu 3 Axis Menggunakan Alat Bantu Dial Indikator dan Block Gauge. Prosiding Conference on Design and Manufacture Engineering and Its Application, 1(1), 350-356. Retrieved from https://journal.ppns.ac.id/index.php/CDMA/article/view/341
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
