ANALISIS UMUR PAKAI OLI PADA FAN PLTU TE 3x10 MW
DOI:
https://doi.org/10.5281/zenodo.14942716Keywords:
viscosity, fan, oil, running hours, hoeppler viscometerAbstract
One of the boiler auxiliaries for the running of the production process is the fan. The fan acts as a primary and secondary air supply and as a vacuum cleaner for the remaining ash when the boiler burns and is discharged into the atmosphere. In this fan often occurs over heat (over heat) one of the causes is the decline in oil quality. Lack of attention to the lubrication system if allowed to continue will experience over heat in the fan which will cause damage to the fan, especially the bearing due to the decrease in oil viscosity caused by operating hours and temperatures that affect the oil in the fan. The data obtained will be processed and analyzed with a Quantitative to see the effect of running hours and temperature on the kinematic viscosity of oil samples. From this study with a test of 40 ° C obtained results at 0 hours (92.88 cSt), 1923 hours (57.94 cSt), 2012 hours (53.26 cSt), 2195 hours (46.82 cSt), 2202 hours (44.75 cSt), 2207 hours (43.26 cSt). From the results of this study, running hours greatly affect the kinematic viscosity value and temperature treatment of oil affects the kinematic viscosity along with the increase in running hours
Downloads
References
Tipe Circulation Fluidized Bed Di PLTU 3x10MW”. MACHINERY: Jurnal Teknologi Terapan, vol. 4, No. 2, pp. 159–166, 2023.
[2] Marsudi. (2016). Pengertian dan Sejarah PLTU. www.scribd.com.
[3] R. Prasetyowati, “Pengaruh Suhu Kamar Terhadap Viskositas Minyak Pelumas”. Jurnal Sains Dasar, vol. 4, No. 1, pp. 42–48. https://doi.org/10.21831/jsd.v4i1.8440
[4] A. Bayu, and D. Darmanto, “Karakterisasi Koefisien Gesek Permukaan Baja St 37 Pada Bidang Datar Terhadap Viskositas Pelumas”. Momentum, vol. 8, No.2, pp. 11–18, 2019.
[5] E. S. Hadi, and M. Mulyadi, “Pengaruh Jarak Tempuh terhadap Viskositas Oli pada Sepeda Motor Matic Tahun 2011”. Jurnal Rekayasa Energi Manufaktur, vol. 2, No. 2, pp. 63–68, 2017.
[6] M. R. Harahap, “Analisis Kadar Air Dan Flash Point Pada Sampel”. Jurnal Amina. Vol. 3, No. 1, pp. 13–17, 2021
[7] Effendi, “Penurunan nilai kekentalan akibat pengaruh kenaikan temperatur pada beberapa merek minyak pelumas”. Jurnal Intekna, vol. 14, No. 1, pp. 1–9, 2018 https://ejurnal.poliban.ac.id/index.php/intekna/article/view/159
[8] P. Lumbantoruan and E. Yulianti, “Pengaruh Suhu Terhadap Viskositas Minyak Pelumas (Oli)”. Jurnal Sainmatika, vol. 13, No. 2, pp. 26–34, 2016.
[9] Alirejo, “Kajian Penerapan Viskositas Minyak Pelumas Pada Mesin Penggerak Utama Kapal Perikanan Di PT. Hasil Laut Sejati. Jurnal Kelautan Dan Perikanan Terapan JKPT, vol. 1, No.1, 2018
[10] M. Salafudin, “Analisis Pengaruh Viskositas Pelumas Multi Grade Terhadap Karakter Pelumas”. Jurnal Momentum, vol. 16, No. 1, pp. 10-13, 2020.
[11] R. Siskayanti, and M.E. Kosim, “Analisis Pengaruh Bahan Dasar Terhadap Indeks Viskositas Pelumas Berbagai Kekentalan”. Jurnal Rekayasa Proses, vol. 11, No. 2, pp. 94-103. 2018 https://doi.org/10.22146/jrekpros.31147
[12] N. Nasroni, S. Sudarno, and M. Munaji, “Pengaruh Kenaikan Temperatur Terhadap Angka Viskositas Oli Sepeda Motor Matic”. Komputek, vol. 1, No. 1, 1. 2018. https://doi.org/10.24269/jkt.v1i1.32
[13] Oli Indo Timur Raya. . “Turalik 48- Pelumas Mesin Diesel / Industri”. www.Oliindotimurraya.com.
[14] J. Brier, and L.D. Jayanti, “Pengukuran Kekentalan Zat (Viskositas)”. JKM, vol.21, No. 1, pp. 1-9, 2020 http://journal.umsurabaya.ac.id/index.php/JKM/article/view/2203
[15] ASTM International, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity), ASTM D445-21, 2021.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
