ANALISA PENGARUH KECEPATAN PUTARAN PADA MESIN PENGADUK BAHAN UNTUK PUPUK ORGANIK DAN MEDIA TANAM TERHADAP WAKTU DAN HASIL PUTARAN (Di KOREM 044/GAPO, Desa Rambutan Kabupaten Banyuasin)
DOI:
https://doi.org/10.5281/zenodo.10122250Keywords:
Mesin Pengaduk, Pupuk organik cair, limbah organikAbstract
This mixing machine for organic fertilizers and planting media is made to make it easier for farmers and industry to mix organic fertilizers and planting media, so that the estimated time of mixing materials for organic fertilizers and planting media by manual method which takes a relatively long time can be minimized, it is necessary to have a the tool is technically and economically acceptable by the communityThe method used is an experimental method by designing machines directly at the Polsri Mechanical Engineering workshop.This study uses technical analysis calculations as data calculations and analysis which consists of 5 kg of organic waste + 30 liters of water with a time variation of 2 minutes, 4 minutes, 7 minutes, and 9 minutes using a power of 2650 rpm. Each treatment was repeated 4 (four) times so that 15 trials were obtainedIn an average time of 5.5 minutes, it produces 33.44 liters of material for liquid organic fertilizer that has been stirred. Then it can be seen that the efficiency of the material mixing machine for organic fertilizer and planting media 42.80%
Downloads
References
Atmanegara, Fran’s Dwi Saputra, Rekyan Regasari Mardi Putri, and Sutrisno. 2017. “Implementasi Metode Profile Matching Untuk Seleksi Penerimaan Anggota Asisten Praktikum ( Studi Kasus : Laboratorium Pembelajaran Kelompok Praktikum Basis Data FILKOM ).†Jurnal Pengembangan Teknologi Informasi Dan Ilmu Komputer 1 (12): 1804–12.
Bunari, Bunari, Ratih Purnama Sari, Dita Asrilla Putri, Dini Oktafiani, Dwi Puspita, Widya Triananda, Pika Desmayu Putri, et al. 2022. “Pemanfaatan Limbah Sayuran Dan Buah-Buahan Sebagai Bahan Pupuk Organik Cair Di Desa Pangkalan Batang Melalui Program KUKERTA Universitas Riau.†Jurnal Pengabdian UNDIKMA 3 (3): 453. https://doi.org/10.33394/jpu.v3i3.5825.
Greeanplanets. n.d. “Jenis Pupuk Organik - Pupuk Organik, Reklamasi & Rehabilitasi, Waste Management.†Accessed August 6, 2023. https://www.greenplanet.co.id/index.php/post/70/Jenis+ Pupuk+Organik.
Jalaluddin, Jalaluddin, Nasrul ZA, and Rizki Syafrina. 2017. “Pengolahan Sampah Organik Buah- Buahan Menjadi Pupuk Dengan Menggunakan Effektive Mikroorganisme.†Jurnal Teknologi Kimia Unimal 5 (1): 17. https://doi.org/10.29103/jtku.v5i1.76.
Mohammad, Rizal. 2011. “ANALISIS PENGELOLAAN PERSAMPAHAN PERKOTAAN (Sudi Kasus Pada Kelurahan Boya Kecamatan Banawa Kabupaten Donggala).†Smartek 9: 155–72.
Nursallam, 2019. 2013. “Metode Penelitian Fallis, A.G, 2016.†Nursallam, 2019. (2013). Metode Penelitian Fallis, A.G, 2016. Journal of Chemical Information and Modeling, 53(9), 1689–1699.Journal of Chemical Information and Modeling 53 (9): 1689–99.
Pengelolaan Limbah Bahan Berbahaya Dan Beracun Rumah Tangga: Studi Kasus Kelurahan Pasar Tais Kecamatan Seluma Kabupaten Seluma.†Naturalis: Jurnal Penelitian Pengelolaan Sumber Daya Alam Dan Lingkungan 8 (2): 49–61. https://doi.org/10.31186/naturalis.8.2.9209.
Sahil, Jailan, Mimien Henie Irawati Al Muhdar, Fachtur Rohman, and Istamar Syamsuri. 2016. “Sistem Pengelolaan Dan Upaya Penanggulangan Sampah Di Kelurahan Dufa-Dufa Kota Ternate.†Jurnal Bioedukasi 4 (2): 478–87. https://www.researchgate.net/publication/32187313.
Sidabalok, Inawaty, Andi Kasirang, and Suriani. 2014. “Pemanfaatan Limbah Organik Menjadi Kompos.â€Majalah Aplikasi Ipteks NGAYAH 5 (2): 85–94.
Syamsiah, A. Mushawwir Thayeb, and A. Faridah Arsal. 2021. “Pemanfaatan Limbah Buah Dan Sayuran Sebagai Bahan Baku Pembuatan POC.†Seminar Nasional Hasil Pengabdian 2021, no. ISBN: 978-623- 387-015-3: 807–12.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.