PERANCANGAN ALAT PRAKTIKUM FISIKA GERAK JATUH BEBAS BERBASIS INTERNET OF THINGS

Authors

  • Anildo Agustian Politeknik Negeri Sriwijaya
  • Adian Aristia Anas Politeknik Negeri Sriwijaya
  • Romi Wilza Politeknik Negeri Sriwijaya
  • Ahmad Junaidi Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.5281/zenodo.14241906

Keywords:

physics lab, free fall motion, internet of things, final velocity, ANOVA

Abstract

Kinematics of Free Fall Motion (FFM) is one of the important chpaters in physics courses. However, the Physics Laboratory at the Department of Mechanical Engineering, State Polytechnic of Sriwijaya does not have practical tools of FFM yet. This study aims to design and determine the performance of the FFM physics lab based on the Internet of Things (IoT). This research method uses qualitative method and experimental approach. This physics lab is afterward compared to theoretical calculations from the FFM formula by testing it at 3 falling heights of 100 cm, 130 cm, and 150 cm, as well as at 3 different masses of 100 g, 200 g, and 500 g. All data collected need to be analyzed using ANOVA of linear regression to obtain the level of accuracy and the relationship between falling heights and masses towards final velocities of the test objects. The results of the study shows that the development of the lab physics FFM IoT-based has very decent performance as long as the average error percentage is 5.52% or less than 10% as well as the level of average accuracy level is 94.48%. The results of the analysis showed that falling heights have a significant effect towards final velocities of the FFM’s test objects. On the other hand, variety of masses barely has no effect towards final velocities of the physics lab.

Downloads

Download data is not yet available.

References

[1] N. Shofiyah and F. E. Wulandari, Gerak dan Perubahan. Sidoarjo: UMSIDA Press, 2020. doi: https://doi.org/10.21070/2020/978-623-6081-15-0.

[2] Sarjono, “Pentingnya Laboratorium Fisika di SMA/MA dalam Menunjang Pembelajaran Fisika,” J. Madaniyah, vol. 8, no. 2, pp. 262–271, 2018.

[3] Z. Azhar, “Pembuatan Alat Praktikum Digital pada Konsep Gerak Jatuh Bebas Sebagai Media Pembelajaran Fisika. Jurnal Ikatan Alumni Fisika,” J. Ikat. Alumni Fis. Univ. Negeri Medan, vol. 4, no. 1, 2018, doi: 10.24114/jiaf.v4i1.10884.

[4] F. Susanto, N. K. Prasiani, and P. Darmawan, “Implementasi Internet of Things dalam Kehidupan Sehari-Hari,” J. Imagine, vol. 2, no. 1, pp. 35–40, 2022, doi: 10.35886/imagine.v2i1.329.

[5] F. Muchlis, D. Sulisworo, and M. Toifur, “Pengembangan Alat Peraga Fisika Berbasis Internet of Things untuk Praktikum Hukum Newton II,” J. Pendidik. Fis. Univ. Muhammadiyah Makasar, vol. 6, no. 1, pp. 13–20, 2019, doi: https://doi.org/10.26618/jpf.v6i1.956.

[6] M. K. Hamdani and Supardiyono, “Rancang Bangun Alat Praktikum Gerak Jatuh Bebas Digital Berbasis Sensor Inframerah,” IPF Inov. Pendidik. Fis., vol. 9, no. 3, pp. 410–416, 2020, doi: https://doi.org/10.26740/ipf.v9n3.p410-416.

[7] M. A. Rahman and A. T. Asyhari, “The Emergence of Internet of Things (IoT): Connecting Anything, Anywhere,” Computers, vol. 8, no. 2, 2019, doi: https://doi.org/10.3390/computers8020040.

[8] A. Ristiawan, “Analisis Gerak Jatuh Bebas dengan Metode Video Based Laboratory (VBL) Menggunakan Software Tracker,” JoTaLP J. Teach. Learn. Phys., vol. 3, no. 2, pp. 26–30, 2018, doi: 10.15575/jotalp.v3i2.6556.

[9] S. Rachmawati, A. Z. Ibrahim, S. P. Fajriani, and I. Febilioni, “Kajian Gerak Jatuh Bebas dengan Persamaan Lagrangian & Newtonian sebagai Bahan Ajar Fisika Kelas X,” Mitra Pilar J. Pendidikan, Inovasi, dan Terap. Teknol., vol. 1, no. 2, 2022, doi: 10.58797/pilar.0102.07.

[10] Riduwan, Dasar-Dasar Statistika. Alfabeta, 2023.

[11] E. F. Yandra, B. P. Lapanporo, and M. I. Jumarang, “Rancang Bangun Timbangan Digital Berbasis Sensor Beban 5 Kg Menggunakan Mikrokontroler Atmega328,” POSITRON, vol. 6, no. 1, pp. 23–28, 2016, doi: http://dx.doi.org/10.26418/positron.v6i1.15924.

[12] Nuryadi, T. D. Astuti, and E. S. Utami, Dasar-Dasar Statistik Penelitian. Sibuku Media, 2017.

[13] Sugiyono, Metode Penelitian Manajemen, 6th ed. Bandung: Alfabeta, 2018.

Downloads

Published

2024-11-29

How to Cite

Agustian, A., Anas, A. A., Wilza, R., & Junaidi, A. (2024). PERANCANGAN ALAT PRAKTIKUM FISIKA GERAK JATUH BEBAS BERBASIS INTERNET OF THINGS . MACHINERY Jurnal Teknologi Terapan, 5(3), 212–221. https://doi.org/10.5281/zenodo.14241906

Issue

Vol. 5 No. 3 (2024): Machinery: Jurnal Teknologi Terapan

Section

Articles

License

Copyright (c) 2024 Authors and Publisher

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

Most read articles by the same author(s)