PEMANFAATAN LIMBAH BATU BATA KLINKER `SEBAGAI BAHAN PENGGANTI AGREGAT HALUS DAN KASAR PADA CAMPURAN BETON
Keywords:
Beton, SDA, Klinker, Kuat Tekan Beton.Abstract
Concrete constitutes a blend of various constituents, including Portland cement, coarse aggregate (crushed stone),
fine aggregate (sand), and water. As the availability of natural resources diminishes, the escalating demand for
infrastructure construction could lead to environmental repercussions if these resources are incessantly exploited.
The region of South Sumatra, particularly in the Lubuklinggau vicinity, houses numerous red brick factories.
Byproducts of these factories comprise Clinker/Scorched Brick Waste, characterized by its lightweight,
impermeable, durable, and non-biodegradable nature. This study aims to effectively employ this waste to produce
concrete that is not only of superior quality but also economically viable. The research findings reveal that using
clinker brick waste to replace fine and coarse aggregates in a 28-day concrete mix: at 25% BBK, the concrete
possesses an average compressive strength of 26.556 MPa; at 50% BBK, it reaches 34.882 MPa; at 75% BBK, it
registers 26.104 MPa; and at 100% BBK, it amounts to 17.55 MPa. Evidently, a remarkable surge in compressive
strength occurs at the 50% BBK variation, with a substantial 36.291% increase (34.882 MPa) compared to the
average compressive strength of conventional concrete (25.594 MPa).
References
Alkhaly, Yulius Rief., Rozi, Fakhrur, (2015) : Pengaruh Subtitusi Agrgat Kasar dengan Pecahan Batu Bata Klinker Terhadap Kuat Tekan Beton Normal.
Badan Standarisasi Nasional, (1990) :Metode Pengujian Analisis Saringan Agregat Halus dan Kasar. SNI 03:1968:1990, BSN, Jakarta.
Badan Standarisasi Nasional, (1990) : Metode Pengujian Kadar Air Agregat. SNI 03:1971:1990, BSN, Jakarta.
Badan Standarisasi Nasional, (1996) :Metode Pengujian Kadar Lumpur Agregat. SNI 03:4142:1969, BSN, Bandung.
Badan Standarisasi Nasional, (1998) : Metode Pengujian Berat Isi dan Rongga Udara Dalam Agregat. SNI 03:4804:1998, BSN, Jakarta.
Badan Standarisasi Nasional, (2000) : Tata Cara Pembuatan Rencana Campuran Beton Normal. SNI 03-2834-2000, BSN, Jakarta.
Badan Standarisasi Nasional, (2002) : Tata Cara Pembuatan Campuran Beton Normal. SNI 03-2834-2000, BSN, Bandung.
Badan Standarisasi Nasional, (2002) : Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung (Beta Version). SNI 03-2847-2002, BSN, Bandung.
Badan Standardisasi Nasional, (2004) : Semen Portland. SNI 15-2049-2004, BSN, Jakarta.
Badan Standarisasi Nasional, (2008) : Cara Uji Slump Beton. SNI 1972-2008, BSN, Jakarta.
Badan Standarisasi Nasional, (2008) : Cara Uji Berat Jenis dan Penyerapan Air Agregat Halus. SNI 1970-2008, BSN, Bandung.
Badan Standarisasi Nasional, (2008) : Cara Uji Berat Jenis dan Penyerapan Air Agregat Kasar. SNI 1969-2008, BSN, Bandung.
Badan Standarisasi Nasional, (2011) :Tata Cara Pembuatan dan Perawatan Benda Uji Beton di Laboratorium. SNI 2493-2011, BSN, Jakarta.
Badan Standarisasi Nasional, (2011) :Tata Cara Uji Kuat Tekan Beton Dengan Benda Uji Silinder. SNI 1974-2011, BSN, Jakarta.
Standard Test Method For Amount, (2011): Water Required For Consistency Of Hydraulic Cement Paste ASTM C187, 2011 Edition, English.
Tampubolon, Sudarno P. (2022). Struktur Beton 1. Jakarta: Universitas Kristen Indonesia: Jakarta.
Yurnalis, Fido et.al. 2016. Beton Ringan dengan Limbah Bata Merah sebagai Alternatif Pengganti Agregat. Aceh: Universitas Syiah Kuala
