KAJIAN KONDISI OPERASI (TEMPERATUR DAN TEKANAN) SEPARATOR II (SP-02) PADA UNIT PROTOTIPE KONVERSI SAMPAH PLASTIK MENJADI BAHAN BAKAR CAIR

Abstract

The conditions employed in the process of mild fraction and the weight fraction of the Polyetilen therepetalite yield, under the standard conditions of separator will only separate the phases of the gas and the phases, and the energy contained in the compound. But with optimum operating conditions it will be demanded on the volume of the lower product and product produced by the separator (SP-02). To obtain optimal conditions, trial-error calculations are performed in several different operating conditions. The optimal condition is the condition in which the separator can produce the lower component volume of the product plus the presence of a gas that is levivated into liquid fuel. Optimum conditions that have been calculated by the trial-error method will be tried in the actual process, but in fact the results of trial-error calculations and actually vary due to the separating factor separator performance (SP-02)