EXPERIMENTAL TESTING OF THE ROTOR SHAFT SPEED PREDICTION PROGRAM

Authors

  • Alexander Sembiring Program Studi Mekanisasi Pertanian, Politeknik Negeri Lampung
  • Asnawi Lubis Jurusan Teknik Mesin, Universitas Lampung
  • Retno Wahyudi Program Studi Mekanisasi Pertanian, Politeknik Negeri Lampung

DOI:

https://doi.org/10.53893/austenit.v16i2.8513

Keywords:

co-axial dual rotor system, finite element method, direct method, critical speeds

Abstract

In the process of designing a rotor shaft system, there are aspects that need to be considered to produce a well-functioning rotor shaft system when it starts operating. Failures that occur in rotor shaft systems are generally caused by excessive vibrations in the system. This can be avoided by detecting the system's natural frequencies early on, as predicting its natural frequencies can also predict its critical rotational speeds. The critical rotational speeds of the system can be determined by solving its equations of motion using various methods. In this study, the equations of motion of the system were solved using the finite element method, where local matrix equations were determined according to the equations and then global matrix equations were obtained and solved using a direct method, employing the eigenvalues and eigenvectors of the system. A program was designed to predict the critical rotational speeds of the system. The program was implemented using the MATLAB programming language. The results of the program, when compared with laboratory test results, showed a difference of 1.23%-3.69%.

Downloads

Download data is not yet available.

References

Agung Irawan, Irawan Malik, & ,Mardiana, M. (2021). Analisis Vibrasi Frame Mesin Cnc Plasma Cutting Secara Eksperimen. Machinery: Jurnal Teknologi Terapan, 2(3), 147–151. https://doi.org/10.5281/zenodo.6383878

Budiwantoro, B., (2001), Studi Perbandingan Metode Modal Testing Klasik dan Modal Testing Kompleks Dengan Metode Analitik Dalam Identifikasi Arah Whirling Orbit Sistem Rotor. Jurnal Teknik Mesin Vol. XVI, No. 2, p. 32-42, Institut Teknologi Bandung, Bandung. https://journals.itb.ac.id/index.php/jtms/article/view/4875

Chandra, H., Putra, D. P., & Romli, R. (2021). Investigation Of Stress On Multi-Level Shaft Using Finite Element Method Based On Computer-Aided Engineering. Austenit, 13(1), 23–27. https://doi.org/10.5281/zenodo.4747728

Mubarak, A. Z., Munirwan, R. P., & Razali, A. (2014). Kaji Eksperimental Getaran Roda Gila pada Sepeda Statis. Jurnal Teknik Mesin, 2(1), 25-28. https://jurnal.usk.ac.id/JTM/article/download/4826/4161

F. C. Ningrum, D. Suherman, S. Aryanti, H. A. Prasetya and A. Saifudin, "Pengujian Black Box pada Aplikasi Sistem Seleksi Sales Terbaik Pengujian Black Box pada Aplikasi Sistem Seleksi Sales Terbaik," Jurnal Informatika Universitas Pamulang, vol. 4, no. 4, pp. 125-130, 2019. https://prosiding.respati.ac.id/index.php/PSN/article/download/290/282

Fei, Z. X., Tong, S. G., & Wei, C., (2013), Investigation of the Dynamic Characteristic of Dual Rotor System and Its Start-Up Simulation Based on Finite Element Method. Journal of Zhejiang University Science A 2013 Vol. 14 No. 4 P 268-280, Zhejiang University Pres., Huangzhou. https://doi.org/10.1631/jzus.A1200298

Hutahean, R., (2014), Penerapan Metode Substruktur Dalam Analisis Dinamika Rotor. Jurnal Ilmiah Teknik Mesin Cylinder, Vol 1, No. 1 P. 41-48, Apr. 2014, Universitas Katolik Indonesia Atma Jaya, Yogyakarta. https://ejournal.atmajaya.ac.id/index.php/cylinder/article/view/4280

Jahromi, A. F., (2015), Forward and Backward Whirling of a Rotor with Gyroscopic Effect. Vibration Engineering and Technology of Machinery, Mechanism and Machine Science 23: 879-887, Springer International Publishing, Switzerland. https://doi.org/10.1007/978-3-319-09918-7_78

Lalanne, M., dan Ferraris, G., (1997), Rotordynamics Prediction in Engineering Second Edition. Wiley, New Jersey.

Mahartana, Ida Bagus P. P., dan Guntur, H.L., (2017), Pemodelan dan Analisis Pengaruh Kenaikan Putaran Kerja Terhadap Respon Dinamis, Kasus Unbalance Rotor Steam Turbine Unit 1 PLTU Amurang 2x25 MW. Jurnal Teknik ITS, Vol. 6 No. 1 P: 114-119, Instutut Teknologi Sepuluh November, Surabaya. https://dx.doi.org/10.12962/j23373539.v6i1.21794

Miao, H., Zang, C., and Friswell, M., 2014, Model Updating and Validation of a Dual-Rotor System. Proceedings of ISMA Including USD2014, Nanjing University of Aeronautics and Astronautics, Nanjing, China. http://michael.friswell.com/PDF_Files/C374.pdf

Prasetyo, A., Malik, I., & Azharuddin, A. (2020). Analisis Vibrasi Frame Cnc Router 3 Sumbu Secara Numerik. Austenit, 12(1), 28–33. https://doi.org/10.5281/zenodo.4547828

Yanto, Asmara., & Hidaya, Rahma. (2014). Analisis Perilaku Dinamik Sistem Poros-Rotor 3d. Jurnal Teknik Mesin, 4(2), 75–83. https://doi.org/10.21063/jtm.2014.v4.i2.75-83

Zulhendri, H., Sembiring, A., Lubis, A., (2018), Analytical and Numerical Studies of Dynamic Finite Element Analysis of Coaxial Dual Rotor System with Pseudo Modal Method Using Matlab. Prosiding SNTTM XVII, hal. 029-038, Universitas Nusa Cendana, Kupang. http://repository.lppm.unila.ac.id/9865/3/Makalah%20SNTTM%202018_Zulhendri.pdf

Published

2024-10-31

How to Cite

Sembiring, A., Lubis, A., & Wahyudi, R. (2024). EXPERIMENTAL TESTING OF THE ROTOR SHAFT SPEED PREDICTION PROGRAM. AUSTENIT, 16(2), 77–84. https://doi.org/10.53893/austenit.v16i2.8513

Issue

Section

Articles

Similar Articles

<< < 4 5 6 7 8 9 10 11 12 > >> 

You may also start an advanced similarity search for this article.