STUDI PERANCANGAN ALAT VACUUM FORMING UNTUK PENGEMASAN PRODUK

Authors

  • A. Zamheri Politeknik Negeri Sriwjaya
  • Dicky Seprianto State Polytechnic of Sriwijaya
  • Yogi Eka F Politeknik Negeri Sriwjaya
  • Romi Wilza Politeknik Negeri Sriwjaya
  • Soegeng W Politeknik Negeri Sriwjaya
  • M Hadzik Shiddiq Politeknik Negeri Sriwjaya
  • Doni Ahmad Pasa Politeknik Negeri Sriwjaya
  • Kgs. Muhammad Ryan Bagaskara Politeknik Negeri Sriwjaya

DOI:

https://doi.org/10.53893/austenit.v14i1.4240

Keywords:

Vaccum forming, Polyethylene terephthalate (PET)

Abstract

The use of plastic is now very much in human life today. The nature of plastic is easy to form, light, strong, rust-resistant, as a good electrical insulator and of course has a high economic value, this is what makes the use of plastic more and more even replacing the use of metal, wood and glass. This study aims to design and manufacture a vacuum forming packaging device using PET with a pressure of 10 kPa. The method used is the thermo forming method. Vacuum forming is the simplest method. Parameters selected to indicate the quality of the plastic mold include the type of plastic, heating temperature and pressure. As the material to be tested is plastic type of polyethylene terephthalate (PET) measuring 55.5 cm x 61.5 cm with a thickness of 0.30 mm, The heating temperature is set at a constant temperature of 200.

Downloads

Download data is not yet available.

References

Cahyadi, D., & Lanta, L. (2019). Potensi Industri Produk Plastik Berbasis Industri Rumah Tangga dengan Alat Vacuum Forming Sederhana. Prosiding Seminar Nasional LP2M UNM, Hal 115-120. https://ojs.unm.ac.id/semnaslemlit/article/view/11256

Cahyadi, D., Nurabdiansyah, N., & Farid, M. (2017). Studi Perancangan Alat Cetak Pembuat Kemasan Thermoplastic Bagi IKM Dengan Metode Vacuum Forming. TANRA: Jurnal Desain Komunikasi Visual Fakultas Seni Dan Desain Universitas Negeri Makassar, 4(2), 45–61. http://ojs.unm.ac.id/tanra

Ghani, A., Yohana, E., & Wibowo, D. B. (2014). Mampu Bentuk Plastik pada Proses Vacuum Forming dengan Variasi Tekanan 0.979 Bar, 0.959 Bar, 0.929 Bar, 0.909 Bar pada Temperatur 200 oC. JURNAL TEKNIK MESIN, 2(2), 120–128. http://ejournal-s1.undip.ac.id/index.php/jtm (diakses 13 juli 2021)

Klein, P. (2009). Fundamentals of plastics thermoforming. Synthesis Lectures on Materials Engineering. Ohio University. The Morgan & Claypool Publisher.

Moelyono, E., & Setiabudi, A. (2009). Rancang Bangun Mesin Vacuum Forming untuk Skala Laboratorium. http://digilib.ubaya.ac.id/pustaka.php/133264 (diakses 13 juli 2021)

Manembah, HS. & Prasetya, S (2018). Rancang Bangun Sistem Otomatisasi Pada Mesin Vacuum Forming. Seminar Nasional Teknik Mesin, Politeknik Negeri Jakarta, Hal 103-110. http://semnas.mesin.pnj.ac.id/seminar/index.php/semnas/SNTM18/paper/viewPaper/13 (diakses 13 juli 2021)

Prasetya, S, Hasvienda M. Ridlwan, Muslimin Muslimin, Mulyono, S, Assagaf, I. (2018). KONTROL SUHU MESIN VACUUM FORMING OTOMATIS ANEKA BENTUK KEMASAN DENGAN HMI. http://prosiding.pnj.ac.id/index.php/politeknologi/article/view/1268 (diakses 13 juli 2021)

Handoko, Theodorus B and Bintoro, Agustinus Gatot. (2018). PENGEMBANGAN MESIN VACUUM FORMING UNTUK INDUSTRI KECIL MAKANAN. http://e-journal.uajy.ac.id/id/eprint/15469 (diakses 13 juli 2021)

Hasvienda M. Ridlwan, dkk. (2020). IMPLEMENTASI PERANCANGAN PERANGKAT LUNAK UNTUK KENDALI DAN MONITORING MESIN VACUUM FORMING OTOMATIS. Jurnal Teknik Informatika Kaputama (JTIK) Vol. 4 , No. 1, Januari 2020, Hal 21-28. https://www.jurnal.kaputama.ac.id/index.php/JTIK/article/view/235/246 (diakses 26 juli 2021)

Al Hakim, Wahid Arief and, Muhammad Al Fatih Hendrawan. ST. MT (2020) Pengaruh Variasi Tekanan Vacuum terhadap Penyimpangan Pembentukan Polycarbonate pada Proses Vacuum Forming. http://eprints.ums.ac.id/id/eprint/87465 (diakses 13 juli 2021)

Rachmad, F.B., (2017). Modifikasi alat Vacuum Forming untuk proses Shrink Packing. https://dspace.uii.ac.id/123456789/27854 (diakses 26 juli 2021)

Mujiarto, I. (2005). Sifat dan Karakteristik Material Plastik dan Bahan Adiktif. Semarang. AMNI Semarang.

Downloads

Published

2022-04-30

How to Cite

Zamheri, A. ., Seprianto, D., Eka F, Y., Wilza, R., W, S., Shiddiq, M. H., … Ryan Bagaskara, K. M. (2022). STUDI PERANCANGAN ALAT VACUUM FORMING UNTUK PENGEMASAN PRODUK. AUSTENIT, 14(1), 32–36. https://doi.org/10.53893/austenit.v14i1.4240

Issue

Vol. 14 No. 1 (2022): AUSTENIT: April 2022

Section

Articles

License

Copyright (c) 2022 Authors and Publisher

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, Authors retain copyright and grant the AUSTENIT right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

AUSTENIT, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in AUSTENIT are the sole responsibility of their respective authors and advertisers.