OPTIMALISASI NILAI AKURASI PEMOTONGAN AKRILIK BERWARNA MENGGUNAKAN CNC LASER CUTTING DIODA 15 WATT
DOI:
https://doi.org/10.5281/zenodo.15234349Keywords:
Laser Cutting Dioda, Akrilik, Metode Kuantitatif, Parameter, Jarak NozzleAbstract
In this study, a 15 watt diode laser cutting was used to cut black acrylic material with a thickness of 2 mm. In cutting black acrylic, cutting parameters are required to obtain optimal cutting results, so to obtain optimal parameters, a quantitative method is used with the Larger Is Better characteristic taguchi method approach. There are 3 factors used for cutting parameters, namely laser power (%), cutting speed (mm / min) and nozzle distance (mm). The nozzle distance is a factor that has a significant effect on the results of cutting acrylic with P-Value = 0.000. The optimal cutting parameters for 2 mm acrylic thickness are laser power: 95%, cutting speed: 10 mm / min and nozzle distance: 50 mm with a cutting accuracy of 98.20%.
Downloads
References
[1] A. Nugroho, A. Setya Hutama, and C. Budiyantoro, “Optimasi Keakuratan Dimensi dan Kekasaran Permukaan Potong Material Akrilik dengan Proses Laser Menggunakan Metode Taguchi dan PCR-TOPSIS,” JMPM (Jurnal Material dan Proses Manufaktur), vol. 2, no. 2, 2018, doi: 10.18196/jmpm.2223.
[2] V. Octowinandi and R. Yolanda, “Hasil Dari Mesin Laser Engraving Pada Material Akrilik Dan Pvc,” vol. 3, no. 1, 2022.
[3] A. E. Saputro and M. Darwis, “Rancang Bangun Mesin Laser Engraver and Cutter Untuk Membuat Kemasan Modul Praktikum Berbahan Akrilik,” 2020.
[4] P. R. Fahlevi D and A. Wahyu Pratomo, “Prototipe Mesin Cnc Diode Laser Cutting 5500 Miliwatt Untuk Pembuatan Produk Kreatif Bahan Akrilik.” 2020
[5] G. Halim, E. Budiyanto, M. Metro Jl Ki Hajar Dewantara, and A. Kota Metro, “Analisa kerja mesin CNC laser cutting CO2 2 Axis berbasis MACH3 pada variasi pemotongan,” vol. 3, no. 1, p. 2022.
[6] N. Satyawardhana, M. Sobron Yamin Lubis, and D. Prodi Teknik Mesin, Optimasi Parameter Proses Laser Cutting Terhadap Kekasaran Permukaan Material Acrylictype Clear Dengan Menggunakan Metode Taguchi.” 2022
[7] M. S. Muria Armansyah et al., “Optimasi Parameter Proses Pemotongan Acrylic terhadap Kekasaran Permukaan Menggunakan Laser Cutting Dengan Metode Response Surface.”
[8] S. Slamet, S. Harmoko, and dan Suyitno, “Akurasi dan Produktivitas Mesin Laser Cutting untuk Memproduksi Alat Pelindung Diri (APD) Covid-19,” Journal of Mechanical Design and Testing, vol. 3, no. 2, pp. 83–92, 2021, doi: 10.22146/jmdt.v3i2.59487.
[9] F. Siswoyo Hadisantoso, V. Rainzagi, and A. Asih Supriyanto, “Analisis Hasil Pengujian Engraving dengan Metode Laser Engraving dan Shade Laser Engraving pada Obyek Material Kulit Menggunakan Dobot Magician.” Jurnal RAMATEKNO, vol. 3, no. 1, pp. 30–42, 2023.
[10] M. S. Y. Lubis, A. Wiyoso, H. Wibowo, and S. Ariyanti, “Penentuan Parameter Proses Laser Cutting Terhadap Kekasaran Permukaan Material Acrylyc,” IRA Jurnal Teknik Mesin dan Aplikasinya (IRAJTMA), vol. 2, no. 2, pp. 19–28, Aug. 2023, doi: 10.56862/irajtma.v2i2.43.
[11] M. Ikhsan, U. Ridhani, P. Bosowa, / Makassar, and C. Author, “Analisis Pengaruh Radiasi Sinar Laser Dioda Terhadap Sublimasi Silk Fabric Daya Maksimum 5,5 Watt.” 2022
[12] F. D. Yushi, P. Sidi, dan A. Irma Rustini, P. Studi Teknik Desain dan Manufaktur, J. Teknik Permesinan Kapal, and P. Perkapalan Negeri Surabaya, “Optimasi Parameter Mesin Laser Cutting terhadap Kekasaran dan Laju Pemotongan pada Alumunium 5083 Menggunakan Desain Eksperimen Taguchi Grey Analysis Method.” 2016
[Online]. Available: http://www.azom.com/article.aspx?ArticleID=2804.Html
[13] A. Wijanarta, N. Salam, and D. Anggraini, “Metode Taguchi Untuk Peningkatan Kualitas Mutu Produk,” 2014.
[14] A. Nugroho, A. Setya Hutama, S. Program, R. Teknologi, M.-P. Perancangan, and S. Atmi, “Metode Taguchi-PCR Topsis Untuk Optimasi Energi Dan Kecepatan Grafir Mesin Laser”. 2019
[15] I. Apriansyah et al., “Pada Fillamen Esteel Dengan Pendekatan Metode Taguchi,” vol. 2, no. 1, p. 2021, 2021, doi: 10.5281/zenodo.474842.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Authors and Publisher
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.Â
MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.
