PENGARUH MEDIA PENDINGIN OLI BEKAS PADA PROSES QUENCHING TERHADAP KEKERASAN LINGGIS BRONGSONG

Article Sidebar

PDF (Bahasa Indonesia)
Published: Oct 25, 2022
DOI: https://doi.org/10.5281/zenodo.7246725
Keywords:
Heat Treatment, Quenching, ASTM A106 Grade B Carbon Steel Pipe, Testing, ANOVA.

Main Article Content

Gandi Hanggara
Politeknik Negeri Sriwijaya
Fenoria Putri
Politeknik Negeri Sriwijaya
Indra Gunawan
Politeknik Negeri Sriwijaya

Abstract

The purpose of this study was to determine the effect of the quenching process that uses used oil as a cooling medium with temperature variations of 750oC, 850oC, and 900oC with a holding time of 30 and 40 minutes to the hardness of the eye of the brongsong crowbar which is often subjected to dullness. The main material used by the people of Sukadana village in making this brongsong crowbar is pipa carbon steel ASTM A106 grade B. This pipe belongs to medium carbon steel because it has a carbon element of 0.30%. After the heat treatment process of the brongsong crowbar specimen, hardness testing was carried out using a rockwell hardness test tool. The results of the hardness test were analyzed using ANOVA calculations. From the results of this study, it was found that the brongsong crowbar specimen experienced an increase in hardness, with the highest hardness value of 52.6 HRC obtained from the quenching process using used oil as a cooling medium and with a holding time of 40 minutes at a temperature of 850oC, while the lowest hardness value is obtained from the results of the quenching process using used oil cooling media with a holding time of 30 minutes at a temperature of 750oC of 38.8 HRC. So that it can be known that the highest hardness value is obtained from the results of the quenching process using used oil cooling media with a holding time of 40 minutes at a temperature of 850oC.

Downloads

Download data is not yet available.

Article Details

How to Cite
Hanggara, G., Putri, F., & Gunawan, I. (2022). PENGARUH MEDIA PENDINGIN OLI BEKAS PADA PROSES QUENCHING TERHADAP KEKERASAN LINGGIS BRONGSONG. MACHINERY: Jurnal Teknologi Terapan, 3(3), 77–86. https://doi.org/10.5281/zenodo.7246725
Issue
Vol. 3 No. 3 (2022): Machinery: Jurnal Teknologi Terapan
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

References

Apriatun, Taufikurrahman, dan Sundari, E. 2021. “Analisa Pengaruh Variasi Waktu Penahanan Pada Proses Pack Carburizing Terhadap Kekerasan Baja Karbon Rendah ST 37”. Machinery Jurnal Teknologi Terapan Vol.2, No.1. Palembang.

Jordi, M., Yudo, H., dan Jokosisworo, S. 2017. “Analisa Pengaruh Proses Quenching Dengan Media Berbeda Terhadap Kekuatan Tarik dan Kekerasan Baja ST 36 Dengan Pengelasan SMAW”. Jurnal Teknik Perkapalan Vol.5, No.1. Semarang.

Octal. 2012. “ASTM A106 Grade B Pipe Specification”. https://www.octalsteel.com/astm-a106-grade-b-pipe. (diakses dan diunduh pada 14 Januari 2022).

Sundari, E., Taufikurrahman, dan Fahlevi, R. 2018. “Analisa Pengaruh Pack Carburizing Terhadap Sifat Mekanis Sprocket Imitasi Sepeda Motor Menggunakan Arang Kayu Gelam dan Serbuk Cangkang Remis Sebagai Katalisator”. Jurnal Austenit Vol.10, No.2. Palembang.

Supriyanto, A., Alimuddin, dan Bohari. 2018. “Analisis Logam Fe, Cu, Pb, Dan Zn Dalam Minyak Pelumas Baru dan Bekas Menggunakan X-Ray Fluorescence”. Jurnal Atomik Vol.03 (1) hal 13-17. Samarinda

Yunus, M., Najamudin, dan Kurniadi. 2016. “Pengaruh Perlakuan Quenching-Tempering Terhadap Kekuatan Impak Pada Baja Karbon Sedang”. Jurnal Teknik Mesin Universitas Bandar Lampung Vol.2 No.1 Hal.1-66. Bandar Lampung.

Zamroji, M. 2018. “Analisa Pengaruh Heat Treatment (Hardening) Terhadap Sifat Mekanik dan Struktur Mikro Besi Cor Nodular (FCD 60)”. Skripsi Universitas Pamulang Tangerang Selatan-Banten.