DETERMINATION OF COD, pH AND COLOR INTENSITY ON SONGKET INDUSTRIAL WASTE USING TEA DREGS AS ADSORBENT

Authors

  • Indah Purnamasari Politeknik Negeri Sriwijaya
  • Muhammad Yerizam Politeknik Negeri Sriwijaya
  • Nyayu Zubaidah Politeknik Negeri Sriwijaya

Keywords:

Tea Dregs, adsorbents, Batch Process

Abstract

The activities of textile industry is often pollute the surrounding environment. It also occurs in industrial of Palembang  Weaving Songket. It influences the acidity and colored of the water. To manage this condition, the colored wastewater using adsorbents that absorbed from tea dregs. This study aimed to determine the effect of tea dregs adsorbent for wastewater quality improvement Songket industry. The Method of treatment of wastewater is used Batch system, which the wastewater is placed in a container by adding the adsorbent from the dregs of tea.  The used of variable is the absorption time for 2 hours, 4 hours, and 6 hours, with the composition of adsorbent mass 5 gr, 10 gr, and 15 gr. Tea dregs that used in this study has the 19.26% of hemicellulose, 39.54% of cellulose and lignin 20%. It takes four hours for the research in order to obtain maximum results, with tea dregs adsorbent composition that produces a pH smaller than the initial waste 6, COD content of 89.41 gr / L, and 3.993 ppm color intensity. Therefore, absorbent from the dregs of tea is very useful for the development of the textile industry, especially for Songket industrials.

Author Biographies

Indah Purnamasari, Politeknik Negeri Sriwijaya

Teknik Kimia Politeknik Negeri Sriwijaya

Muhammad Yerizam, Politeknik Negeri Sriwijaya

Teknik Kimia Politeknik Negeri Sriwijaya

Nyayu Zubaidah, Politeknik Negeri Sriwijaya

Teknik Kimia Politeknik Negeri Sriwijaya

Downloads

Published

2013-07-01