PENINGKATAN AKURASI DIMENSI DAN TINGKAT KEKERASAN PADA FILLAMENT ESTEEL DENGAN PENDEKATAN METODE TAGUCHI

Article Sidebar

PDF
Published: Feb 26, 2021
DOI: https://doi.org/10.5281/zenodo.4748423
Keywords:
3D Printing, Akurasi Dimensi, kekerasan, Taguchi

Main Article Content

Icvan Apriansyah
Jurusan Teknik Mesin Politeknik Negeri Sriwijaya
Ahmad Zamheri
Fatahul Arifin

Abstract

3D Printing is a new breakthrough in the world of technology. This breakthrough is very popular in all parts of the world, especially among academia and industry. The emergence of 3D Printing technology is very influential in several industrial fields, especially from an economic perspective. Rapid prototyping of mechanical components with techniques and low production volumes to quickly produce prototypes. The purpose of this study was to determine the dimensional accuracy of the 3D printer process using different parameters. In the testing process using the Digimatic Vernier Caliper Mitutoyo Absolute test tool, which uses an accuracy of 0.02 mm and the ALBERT GNHEM HORGEN hardness test tool and the Mitutoyo PJ-A3000 Projector Profile. The test data were analyzed using the Taguchi method.

Downloads

Download data is not yet available.

Article Details

How to Cite
Apriansyah, I., Zamheri, A., & Arifin, F. (2021). PENINGKATAN AKURASI DIMENSI DAN TINGKAT KEKERASAN PADA FILLAMENT ESTEEL DENGAN PENDEKATAN METODE TAGUCHI. MACHINERY: Jurnal Teknologi Terapan, 2(1), 1–7. https://doi.org/10.5281/zenodo.4748423
Issue
Vol. 2 No. 1 (2021): Machinery:02012021
Section
Articles

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to MACHINERY: Jurnal Teknologi Terapan as publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

MACHINERY: Jurnal Teknologi Terapan and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in MACHINERY: Jurnal Teknologi Terapan are the sole responsibility of their respective authors and advertisers.

Author Biography

Icvan Apriansyah, Jurusan Teknik Mesin Politeknik Negeri Sriwijaya

Bidang Manufaktur, Desain Produk, 3D Printing

References

Wirda Novarika, Muchtar Ginting, Almadora Anwar Sani, & Dicki Astra. (2019). PENGARUH Parameter Proses Rapid Prototyping Dengan Teknologi Stereolithography Terhadap Kekerasan Spesimen Uji. Austenit, 11(2), 27–32. http://dx.doi.org/10.5281/zenodo.4547799

Jenarthanan, M. P., & Jeyapaul, R. (2018). Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method. International Journal of Engineering, Science and Technology. https://doi.org/10.4314/ijest.v5i4.3

Pham D, Gault R.., 1998. A comparison of rapid prototyping technologies, IntJ Mach Tools Manuf., 1998;38:1257–87

Soejanto, I. 2009, Desain Eksperimen Dengan Metode Taguchi, Graha Ilmu, Yogyakarta.

Tontowi, A, E., et al., 2017. Optimization of 3D-Printer Process Parameters for Improving Quality of Polylactic Acid Printed Part, International Journal of Engineering and Technology (IJET), Vol 9 No 2 Apr-May 2017

Wang, J., Xie, H., Weng, Z., Senthil, T., dan Wu, L. 2016. A Novel Approach to Improve Mechanical Properties of Parts Fabricated by Fused Deposition Modeling. Materials and Design 105 (2016): 152–159.

Arifin, Fatahul., Arnoldi, D., Sundari, Ella., Putri, Fenoria., Agasa, F., Ramadhan, Y., Susetyo, G., Herlambang, Y. D. (2020). Studi analisis simulasi kekuatan beban pada alat bantu pembuatan lubang dengan sudut kemiringan 45 derajat. None, Jurnal Polimesin

Most read articles by the same author(s)